Payment Express Limited BRF300 Manuel D’Utilisation
1
1 OVERVIEW
The BRF300 contactless antenna is an optional receiver that can be plugged into the SCR300 to support contactless
payments (e.g. Visa PayWave, MasterCard PayPass, Amex ExpressPay). The BRF300 also supports closed loop
proprietary payment cards such as MiFare RFID. The BRF300 can also be used as a standalone device.
The Payment Express BRF300 solution comes in two models. The only difference is mounting orientation. One
landscape and one portrait.
payments (e.g. Visa PayWave, MasterCard PayPass, Amex ExpressPay). The BRF300 also supports closed loop
proprietary payment cards such as MiFare RFID. The BRF300 can also be used as a standalone device.
The Payment Express BRF300 solution comes in two models. The only difference is mounting orientation. One
landscape and one portrait.
2 BRF300
ANTENNA
LANDSCAPE ASSEMBLY (
AB0163
)
Hardware Overview
The BRF contactless antenna is an optional
receiver that can be plugged into the SCR to
support contactless payments (e.g. Visa
PayWave, MasterCard PayPass, Amex
ExpressPay).
receiver that can be plugged into the SCR to
support contactless payments (e.g. Visa
PayWave, MasterCard PayPass, Amex
ExpressPay).
Display LEDs x4
Landscape
design.
Supports closed loop proprietary payment cards
(e.g. MiFare)
(e.g. MiFare)
32-Bit Cortex M3 120MHz processor
Physical Link Interface
Connection with the SCR300 unit is via the attached cable located on the back of the BRF300 unit.
Power Requirements
The device accepts DC regulated from +9VDC to +45V SEL (Safety Extra Low Voltage).
Operating & Storage Temperature Ratings
Storage: -35 to 80 degrees (Celsius)
Operating: -25 to 75 degrees (Celsius)
Additional Comments
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
2. This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority
to operate the equipment.
to operate the equipment.