FUTAIHUA INDUSTRIAL CO. LTD. CMC187 Manuel D’Utilisation
Icon shows
Password： Tag password (The default is“00 00 00 00”)
Bank： Tag storage areas (including RESERVED, EPC, TID, USER; general user operations for the
Password： Tag password (The default is“00 00 00 00”)
Bank： Tag storage areas (including RESERVED, EPC, TID, USER; general user operations for the
EPC area)
Begin： To the starting address of operation area, the unit of word (2 bytes) (include “0-15”16 numerical
EPC operation area will this value is set to 2)
Length: To read and write tags information length, the unit for word (2bytes) (include“1-15”15 numerical;
Tag EPC user operational capacity is 496bits, namely 31 word (see tag EPC length)
Data: Data show/edit box
Read: Read the tag information
Write: Write tag information
Tag EPC user operational capacity is 496bits, namely 31 word (see tag EPC length)
Data: Data show/edit box
Read: Read the tag information
Write: Write tag information
Read the card operation:
Set to access the Bank, Begin, Length and other related parameters, UHF tag set
after the completion of the will to operate on the issuing of the antenna. Should area, click the “read” reading an
and writing card interface button toread the tag informantion reads the tag after the success of the information, the
corresponding tag information. Displayed in the “data” in the edit box and are displayed in the lower left corner
“Read the Tag OK”; As shown in figure 2.10:
and writing card interface button toread the tag informantion reads the tag after the success of the information, the
corresponding tag information. Displayed in the “data” in the edit box and are displayed in the lower left corner
“Read the Tag OK”; As shown in figure 2.10:
Figure 2.10
Write card operation:
Set to access the Bank, the Begin, Length and other related parameters, UHF tag set after
the completion of the will to operate on the issuing of the antenna. Should be area, in the “data” in the edit box
editor to write the tag information, click on “write” button to write the required information, written into work after the
lower left corner tip “Write OK” and displays the information write (when need to write information on tag for
peration, proposed to HF frequency standard. Sign the induction area, close to the issuing of antenna can
improve the success rate of written information; As shown in figure 2.11:
editor to write the tag information, click on “write” button to write the required information, written into work after the
lower left corner tip “Write OK” and displays the information write (when need to write information on tag for
peration, proposed to HF frequency standard. Sign the induction area, close to the issuing of antenna can
improve the success rate of written information; As shown in figure 2.11:
Figure 2.11
3） Check the operation record
A. Click on the “Log” button enter into operation can check card device operation records; As shown in
figure 2.12:
Figure 2.12
B. In the interface of operating records, check the “automatic storage operation record”。