KATHREIN Automotive GmbH TRANSCVRP01 Manuel D’Utilisation
Page 3
1. Introduction
The TRANSCVRP01 is an automotive ECU with an integrated Bluetooth LE transceiver for special
usage. The Bluetooth circuit and electronics are designed to tunnel a not public described data
stream via Bluetooth generic protocol. The device rejects any communication requests from
Bluetooth devices not supporting the nonpublic payload format. The device is fully integrated to the
electronics of the car and is connected with the CAN-Bus of the car to communicate with the rest of
the ECUs.
The device will be integrated in the car only by the car-manufacturer or in case of replacement by a
professional garage. The end-user does not have to do any installations or adjustments. There will
be no aftermarket modules available since the device needs to have a full range of ECUs available
to communicate with.
2. Installation Options
Example for a principle setup in a car.
The BT-Transceiver is designed for in-car use only. It is designed according the detailed specification
of the OEM (car-manufacturer). It MUST be well integrated into the automotive environment
(T
ambient
max. 85 °C) and needs to be installed by the OEM or in case of replacement by a professional
garage. Only the antennas listed at the Antenna Kitting section are allowed to be used along with
this BT-Transceiver.