TCL Communication Ltd. H020 Manuel D’Utilisation

5

6

•

Insert and click the battery into place, then close the cover.

•

Unclip the cover, then remove the battery.

To install, insert the microSD card first, and then place it into the slot 
with the gold contact facing down. To remove the external microSD 
card, slide and take it out from the slot.

  For dual SIM models, insert SIM card first, and then insert 

the external microSD card.

Connect battery charger to your phone and plug into the socket.

 

If the battery is very low, there will be no indication that 
power is being received until the charge is sufficient to show 
the charging status bar. To reduce power consumption and 
energy waste, once the battery is fully charged, disconnect 
your charger from the plug; switch off Wi-Fi, GPS, Bluetooth 
or background-running applications when not in use; reduce 
the backlight time, etc.

Inserting or removing the SIM card 
You must insert your SIM card to make phone calls. Power off your 
phone before inserting or removing the SIM card.

SIM1

SIM2 

(1)

Place the SIM card with the chip facing downwards and slide it into 
its housing. Make sure that it is correctly inserted. To remove the 
card, press and slide it out.

 

For dual SIM models, both SIM1 and SIM2 can support 4G 
networks. If both of them are 4G SIM cards, only one card 
can support 4G network 

(1)

. Your phone do not attempt to 

insert other SIM types like nano cards, otherwise you may 
damage your phone.

Installing or removing the battery
Power off your phone before removing the battery.

(1)

  5017E only.

Pixi 3-4.5 4G_5017A_5017E_US_QG_Eng_EN_13_150617.indd   5-6

2015/6/17   8:24:55