TCL Communication Ltd. H022 Manuel D’Utilisation
5
6
1�2
Getting started
1�2�1
Set up
Installing or removing the back cover
Inserting or removing the SIM card
You must insert your SIM card to make phone calls. Please power off
your phone before inserting or removing the SIM card.
You must insert your SIM card to make phone calls. Please power off
your phone before inserting or removing the SIM card.
4014A
4014E
Place the SIM card with the chip facing down and slide it into its
housing. Make sure that it is correctly inserted. To remove the card,
press and slide it out.
housing. Make sure that it is correctly inserted. To remove the card,
press and slide it out.
Both SIM1 and SIM2 can support 2G and 3G networks. If
both of them are 3G SIM cards, only one card can support
3G network
both of them are 3G SIM cards, only one card can support
3G network
(1)
. Your phone only supports mini-SIM cards.
Do not attempt to insert other SIM types, such as micro and
nano cards, otherwise you may damage your phone.
nano cards, otherwise you may damage your phone.
(1)
4014E only.
Installing or removing the battery
Please power off your phone before removing the battery.
Please power off your phone before removing the battery.
•
Insert and click the battery into place, then close the cover.
•
Unclip the cover, then remove the battery.
Installing or removing the microSD card
To install, please open the microSD card lock first, then place the
external microSD card into the slot with the gold contact facing
down. To remove the external microSD card, please open the
microSD card lock and take it out from the slot.
Charging the battery
external microSD card into the slot with the gold contact facing
down. To remove the external microSD card, please open the
microSD card lock and take it out from the slot.
Charging the battery
Connect the battery charger to your phone and plug it into the
socket.
socket.
If the battery is very low, there will be no indication that
power is being received until the charge is sufficient to show
the charging status bar. To reduce power consumption and
energy waste, once the battery is fully charged, disconnect
your charger from the plug; switch off Wi-Fi, GPS, Bluetooth
or background-running applications when not in use; reduce
the backlight time, etc.
power is being received until the charge is sufficient to show
the charging status bar. To reduce power consumption and
energy waste, once the battery is fully charged, disconnect
your charger from the plug; switch off Wi-Fi, GPS, Bluetooth
or background-running applications when not in use; reduce
the backlight time, etc.
Pixi3-4 Relook 4014A_4014E USA QG_Eng_EN_02_150714.indd 5-6
2015/7/14 10:11:06