Skspruce Technologies Inc. WIA3200 Manuel D’Utilisation
19 JadeOS User Manual
Chapter 4 Interface Configuration
This chapter will describe how to configure interface.
4.1 Naming Ethernet Port
GigabitEthernet <word> is GE port, and parameter ‘word’ format is <slot/port>. ‘slot’
means slot number, ‘port’ means port number. Both start with value 0 and range de-
pends on the real number of Ethernet.
means slot number, ‘port’ means port number. Both start with value 0 and range de-
pends on the real number of Ethernet.
For example, gigabitEthernet 1/0, gigabitEthernet 1/1 and gigabitethernet 1/2 means
the first Ethernet port, the second Ethernet port and the third Ethernet port of the first
slot.
the first Ethernet port, the second Ethernet port and the third Ethernet port of the first
slot.
Ten gigabitethernet<word> is 10G port, and parameter ‘word’ format is the same as
GE port.
GE port.
To inquiry present slot number, use show slot command:
(JadeOS) #show slot
Slot12
‘slot 12’ means present slot number is 12.
4.2 Configuring VLAN
JadeOS operates as a layer-2 switch that uses a VLAN as a broadcast domain. As a
layer-2 switch, JadeOS requires a layer-3 router to route traffic between VLANs.
layer-2 switch, JadeOS requires a layer-3 router to route traffic between VLANs.
4.2.1 Creating VLAN
You can configure Vlan in vlan mode:
Step 1 Enter vlan mode by using following command in config mode:
vlan database
Step 2 Creating vlan
vlan <id>
Note: Delete vlan by using no vlan <id> command.
For example:
(JadeOS)(config)#vlan database
(JadeOS)(config-vlan)#vlan 2
(JadeOS)(config-vlan)#vlan 3 name "VLAN3"
(JadeOS)(config-vlan)#no vlan 2