Skspruce Technologies Inc. WIA3200 Manuel D’Utilisation

(JadeOS) (RADIUS Server "r1") #ip 10.1.1.10 

(JadeOS) (config) #aaa server-group sg 

(JadeOS) (Server Group "sg")#auth-server r1 

Step 2 Configure 802.1x authentication profile 

(JadeOS) (config)#aaa authentication dot1x dot1x 

(JadeOS) (802.1X Authentication Profile "dot1x")#default-role postauth 

(JadeOS) (802.1X Authentication Profile "dot1x")#server-group g1 

Step 3 Configure AAA Profile 

(JadeOS) (config)#aaa profile default 

(JadeOS) (AAA profile "default")#authentication-dot1x dot1x 

(JadeOS) (AAA profile "default")#radius-accounting sg 

(JadeOS) (AAA profile "default")#initial-role preauth 

Step 4 Configure ssid-profile 

 (JadeOS) (config)#wlan  ssid-profile default 

  (JadeOS) (SSID Profile "default")#auth-mode wpa-aes   

Step 5 Configure vap-profile 

  (JadeOS) (config)#wlan vap-profile default 

  (JadeOS) (VAP Profile "default")#aaa-profile default 

  (JadeOS) (VAP Profile "default")#ssid-profile default 

Step 6 Configure ap-template 

(JadeOS) (config)#ap-template default 

(JadeOS) (AP template "default")#vap-profile default 

Step 1 Configure bandwidth named ”BW-8M” and ”BW-2M” in config mode 

  (JadeOS) (config)#aaa bandwidth-contract BW-8M mbits 8 

(JadeOS) (config)#aaa bandwidth-contract BW-2M mbits 2 

 

Step 2 Specify the downstream is BW-8M and the upstream is

 

BW-2M  

(JadeOS) (config)#user-role postauth 

(JadeOS) (config-role)#bandwidth-contract BW-8M downstream 

(JadeOS) (config-role)#bandwidth-contract BW-2M upstream 

To configure user accounting, you need to configure a radius server group first, and 
enable radius accounting in AAA profile. To enable user accounting, use the Ra-
dius-accounting <server-group> command. For example: 

(JadeOS) (AAA profile "aaa")#radius-accounting SG1