SISTEMAICADOS USA LLC Q-38 Manuel D’Utilisation

 

4

2.1.2.  Charging the battery 
Plug the charger into the socket on the side of your phone. Connect the charger to an AC wall socket. The blinking of the battery level icon indicates the battery 
is being charged. When the blinking stops, it indicates the charging is finished 
During charging, the phone and charger will feel warm to the touch. This is normal. 
Warning: 

 

The operating ambient temperature of the charger is 0

C-50C. Do not use it when the temperature exceeds this limit. 

 

Use only chargers approved by the phone manufacturer to ensure safety. Failing to comply with this will violate the terms and conditions of the warranty. 

 
2.2.  Connecting to the Network 
2.2.1.  SIM card 
Please insert available Subscriber Identity Module (SIM) card into your phone before using it. SIM card is supplied by your network carrier. All the information 
related to network connection is recorded on the SIM card, so are the contact information such as names, phone numbers and SMS that you set to store on the 
SIM. You can take out the SIM card from the phone and insert it into another GSM phone to use it. Most new phones will recognize the SIM card automatically. 
 
2.2.2.  Connecting to the network 

After the SIM card is unlocked, you phone will automatically search for the registered network or other local available network. Once connected, the name of 

the network carrier will appear on the top of the screen. 
You phone is now in Standby mode, ready for making and receiving call 
 

 

Network signal strength 
The more the stripe is, the stronger the signal is.   

 

Battery strength 
The full the fill is, the more electric quantity is. Standby screen will show the icon.     

 

Normal mode 
When scene mode is set as normal mode, standby screen will show the icon. 

         

 

Silent mode 
When scene mode is set as mute mode, standby screen will show the icon. 

 

Full message。