TI Precision Shanghai Co. Ltd. LGP302N Manuel D’Utilisation

3) Push one battery case towards lower one box into the end,,
clockwise turn the round battery clamp 90°to mount the lower battery
case

1.6.3 Recharge battery

1)With battery power contactors touch with charger contactor, put battery into

charger case by bayonet lock

2)Plug the charger on 100V/240V power supply.The red lamp becomes

lighting,which indicates recharging.If interval-time is longer,the connector isn’t

fixed well.

3) That the green lamp flashes means recharging is complete.

NOTE: 1) New battery (or battery does not used for several months) should be

recharged for several times.Please recharge it more than 10 hours,

and then the battery can attain best status.

2) Please recharge the battery continuously for another 1~2 hours after

the light green,which is good for the battery.