testo Instruments Co. Ltd 05600420 Manuel D’Utilisation
6 Using the product
18
Large hood
(1220x610 and 1220x305, accessories)
1. Install the aluminium frame and stretch the fabric hood over the
framework, so that the elastic band lies in the recess of the
frame. Make sure that the elastic band fits correctly, especially
at the corners.
2. Pull the lower end of the hood over the measurement base.
3. Attach the hood at two corners using the snap fasteners.
4. Tighten the closure.
5. Push the support rods through the hood, along the markings
3. Attach the hood at two corners using the snap fasteners.
4. Tighten the closure.
5. Push the support rods through the hood, along the markings
and into the funnel in the measurement base.
6. Push the support rods on the top of the hood into the brackets.
- The hood is installed.
- The hood is installed.