Siklu Communication Ltd. SK-MH60GE-A1 Manuel D’Utilisation
MultiHaul Installation Manual
Page 20
2.6.3
Preparing the Cables
Before inserting a cable connector into the ODU, you must first enclose the cable
connector in a protective All-Weather shell. Three sets of All-Weather shells are
provided with the ODU for the ODU interfaces.
connector in a protective All-Weather shell. Three sets of All-Weather shells are
provided with the ODU for the ODU interfaces.
Figure 2-4 All-Weather Connecting Cable Shell Assembly
The provided protective All-Weather Shells fit cables from 3.5mm to 9.0mm diameter.
1. Thread the cable and tight the shell to the ODU firmly by hand (do not use tools).
2. Insert the rubber gasket snugly and tight the connector lock.
Caution:
To avoid accidental damage to the connector, when removing the All-Weather Shell,
unlock the gland first.
unlock the gland first.
2.7
System LEDs
LED
Color
Description
PWR (Power)
Green – Power ON
Blink Green – booting up
Orange – Booting up (2 seconds)
Boot failure if continues)
Red – Power Failure
Off – No Power
RF
Green – At least one station
associated
associated
Device under association, no
station yet associated
Off – Link Down
ETH1/2/3:
Green – Link 1G
Orange – Link 10/100
Off – No Link (Carrier)
BT
For future use