Tracker Technology International Co. Ltd. MSP340 Manuel D’Utilisation

Box includes

Installing SIM card

Charging and Clip assembling 

Buckle Clip

1. The tbpt tracker                    2. Clip

3. USB Cable                           4. Waterproof plug  

5. Screwdriver                          6. AC Adapter                   

1. Loosen 4 screws with the screw driver.

2. Remove the back cover and insert the SIM card into the 

    holder with the gold-colored contacts facing downwards.

3. Put the cover back with the USB side and tighten 4 

    screws back. 

4. insert four waterproof plugs over the screws.
5. Press power button for 

2 seconds

 to turn on pet tracker.

1. Connect the pet tracker to the AC Adapter via the USB cable.
2. 1~2 hours for the fully charge  

Put the collar through the clip.

** Output: 5V/ 500mA

** Output: 5V/ 500mA

Assemble pet tracker and the clip according to the arrow 

mark on the both side. And turn counterclockwise to lock it. 

1. 

3. 

2. 

4. 

5. 

Power button

USB for Charging

LED

SIM card insert side

Arrow mark

Warning

LOCK     UNLOCK

(Option)

6. 

1. No more platform fee, just download the free exclusive smart 
    phone application, you can start tracking tbpt tracker device.
2. Need one SIM card to insert into the tbpt tracker device.
3. Tracking feature:GPS/AGPS/GSM/SMS/LBS
4. Operation:  - Support Google map.
                       - GPS fix data send to owner’s cell phone.
5. Pet’s owner only need to call the Number of the SIM card 
    in the device, then it will respond the data automatically.
6. 8 pin USB for Charging.
7. Battery (Li-Polymer) is 500mAh

8.

Dial the SIM card number 

Real-time location

Geo-Fence Setting

Real-time Tracking

GPS Setting

Alert SMS will be sent 

when the pet run out 

of the Geo-Fence 

area you set..

Set the diameter 

(meter)  of the 

Geo-Fence

GPS location

 LBS (LAC cell ID)

The deviation of LBS position in the city is 100~300meter and 

in the county side is 500meter~1kilometer.

If you prefer more precise location, you may 

turn on the GPS. 

Please note that using GPS may cause higher power 

consuming 

The default setting is GPS off

, so you will only 

receive the LBS (LAC cell ID) position. 

The purpose is power saving.

When the device is in low power , it will send alert SMS to notification number

CE

This device complies with the R&TTE Directive (99/5/EC), the EMC Directive (2004/108/EC), and the Low. 

Voltage Directive (2006/95/EC) issued by the Commission of the European Community. A minimum 

separation distance of 20 cm must be maintained between the user’s body and the device, including the 

antenna during body-worn operation to comply with the RF exposure requirements in Europe.

FCC

Federal Communication Commission Interference Statement .This device complies with Part 15 of the FCC 

Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful 

interference, and (2) this device must accept any interference received, including interference that may 

cause undesired operation.This equipment has been tested and found to comply with the limits for a Class 

B digital device, pursuant to. Part 15 of the FCC Rules. These limits are designed to provide reasonable 

protection against harmful interference in a residential installation. This equipment generates, uses and can 

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause 

harmful interference to radio communications. However, there is no guarantee that interference will not 

occur in a particular installation. If this equipment does cause harmful interference to radio or television 

reception, which can be determined by turning the equipment off and on, the user is encouraged to try to 

correct the interference by one of the following measures:

Please make sure the SIM card is already activated and ready to

use. Additionally, confirm the PIN code is free before install the SIM card. If

not, please use other mobile phone to cancel the PIN code or ask the local

carrier for more information.

The pet tracker only supports GSM and

GPRS system. Therefore, it is not working

with CDMA or WCDMA system.

We recommend charging as soon as you receive the low battery notification.

Please set the low power alert before use tbpt tracker.

Add device

Download APP

Low power alert setting

Tap Icon

Tap the icon

Tap the GPS icon 

to turn on/off GPS

It may take seconds 

to have the GPS fixed. 

Wait for a moment 

and refresh again to 

get GPS location

Reflash

Tap 

ok

Distance setting

Please dial the 

SIM card number 

manually, and 

hang up phone 

after hearing 

ringtone. 

You will get 

the current 

location. 

Add device

Add

Delete

History Playback

Setting

Select

Add

Delete

History Playback

Setting

Select

Cancel

Low power alert setting

Setting

Select device

OK

Canel

SOS & Low Power alert setting

enter phone number

Reading

Save

Back

The SMS alert function works differently according to the 

model.  Please refer to the appropriate manual.

Notification SMS 

will send to the 

number 

you entered.

APP will dial the 

device automatically. 

It will hang up 

automatically.

(Some smart phone 

will not hang up 

automatically) 

This function may 

cause extra SMS 

charge, when using 

Geo-Fence, GPS will 

be forced to turn on.

Select device Tap ok 

Reading: 
For checking the 
previous setting 
number.

The standby mode will be activated 
automatically if the tbpt tracker keeps 
still for 3 minutes ( GSM off /GPS off ). 
The tbpt tracker cannot be tracked 
under standby mode. Please touch the 
tbpt tracker slightly to wake it up.

Standby Mode

Alarm detection. 

Please set the geo-fence(Meter)

OK

Cancel

0 0 0

1 0 0

0 0 0

Coordinates:

(25.06795,121.59350)

To set Geo-Fence here?

Waring:

This function will have an SMS

fee, and the GPS will beforced

to turn on. 

OK

Cancel

Select device

OK

Canel

Nickname:

353301054053918

IMEI:

353301054053918

TIME:

2012-12-20 18:00)33

Location:

28, Lane 123, Sec. 6, Minquan 

E. Rd., Neihu Dist., Taipei 

Reflash

GPS

Icon

Back

Nickname:

353301054053918

IMEI:

353301054053918

TIME:

2012-12-20 18:00)33

Location:

28, Lane 123, Sec. 6, Minquan 

E. Rd., Neihu Dist., Taipei 

Reflash

GPS

Icon

Back

Tap any location on the map for 3 

seconds as central point for Geo-Fence

The mobile antivirus APP and the SMS filter APP may cause tbpt dysfunctional

QR Code

You can search “tbpt Tracker“ 

on the Google play and download 

the application.

Please make sure the SIM card is already activated and ready to use. Additionally, confirm 
the PIN code is free before install the SIM card. If not, please use other mobile phone to cancel 
the PIN code or ask the local carrier for more information. The pet tracker only supports GSM 
and GPRS system. Therefore, it is not working with CDMA or WCDMA system. We recommend 
charging as soon as you receive the low battery notification. Please set the low power alert before 
use tbpt tracker. 

●  Reorient or relocate the receiving antenna.
●  Increase the separation between the equipment and receiver.
●  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
●  Consult the dealer or an experienced radio/TV technician for help.
 
FCC Caution:
●  Any changes or modifications not expressly approved by the party responsible for compliance could void 
    the user's authority to operate this equipment.
●  This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
 
Radiation Exposure Statement:
This device meets the government’s requirements for exposure to radio waves.
This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) 
energy set by the Federal Communications Commission of the U.S. Government. The exposure standard for 
wireless device employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit 
set by the FCC is 1.6W/kg. *Tests for SAR are conducted using standard operating positions accepted by the FCC 
with the device transmitting at its highest certified power level in all tested frequency bands.