Janome America Inc. EDGE15X Manuel D’Utilisation

3

q

w

e

r

t

y

u

o

q

 Universal power supply

w

 Power cord

e

 Blade holder

r

 Blades 

    • Blue Cap Blades for cutting thicker materials
    • Red Cap Blades for cutting thin materials
    • Yellow Cap Blades for cutting fabrics
t

 12˝x12˝ (or 15˝x15˝) low tack adhesive cutting mat

y

 12˝x12˝ (or 15˝x15˝) high tack adhesive cutting mat

u

 Pen Holder

i

 Pens

o

 USB 2.0 cable

!0

 Artistic SimpleCut Installation Disc

!1

 Owner’s manual with Artistic SimpleCut activation code

i

!0

!1

SimpleCut Software Installation Instructions

1.   Insert the Artistic SimpleCut Installation DVD into your CD-ROM 

drive. On most computers you will have a AUTORUN screen 

pop up next. If your computer does not have the CD-ROM 

AUTORUN feature activated, open Windows Explorer, then 

open the CD-ROM folder and run the “setup.exe” program.

2.   The Welcome screen informs you that you are about to install 

Creative DRAWings SimpleCut Software. Click “Next” to 

continue. 

3.  When the window with the License Agreement opens: Click 

on the first radio button of the window, confirming that you 

accept the terms of the license agreement. Then click “Next” to 

continue.

4.  On the next window, select the installation type: If you choose 

“Complete” (recommended), all program features will be 

installed. If you choose “Custom”, you have to specify which 

features of the program you want to install. Click “Install” after 

you have made your decision.

5.  Once the installation is finished, the Activation Form will appear.

Fill in the requested information together with the Activation Key 

(found below these instructions). 

6.  Once you have filled this out, click the Activate Product button. 

7.   In order to activate Creative DRAWings SimpleCut, click on the 

“Activate now” button. You must be connected to the Internet.

8.  Once the activation procedure is finished, the “Activation 

Successful” message will appear. If the Activation Key number 

was wrong, or you are not connected to the Internet, you will 

receive an Activation Failure message. Check your Activation 

Key and your internet connection and try again. Once 

successfully activated, click on the “Close” button to close the 

dialog box.

9.   When the Activation process finishes the installation of My 

Editor v5.0 will start automatically. Click “Next” to continue.

10. The window with the License Agreement opens: click on the 

first radio button of the window, confirming that you accept the 

terms of the License Agreement. Then click “Next” to continue.

11. In the next dialog box, enter the user name and the organization, 

if any, and click “Next”. 

12. The Destination Folder dialog box will appear. Press “Next” 

to continue using the default destination, or specify another 

location.

13. In the next window, select the installation type. If you choose 

“complete” (recommended), all program features will be 

installed. If you choose Custom, you will need to specify which 

features you want to install. Click “Install” after you have made 

your decision.

14. The next dialog box asks you to select what files you want My 

Editor to handle.  You can choose any selection that you want, 

but it is recommended that you use the first option: “my editor 

v5.00 will handle only ngs, and mls”.

15. You are now ready to install. Click “Install” to begin. 

    Once the installation finishes, click on “Finish”.

16. The next dialog box informs you that the Creative DRAWings 

SimpleCut was installed successfully. Click on the “Finish” 

button to finish the installation process.

17.  If an additional installation wizard starts to install DirectX9C, you 

MUST allow it to install or the software will not work properly. 

Follow on-screen prompts to install.

– Verification code –