Zeeva International Limited SP0272 Manuel D’Utilisation

Instruction Manual

Congratulations, and thank you for choosing 
the Wooden Wireless Speaker. This manual 
will help you operate the Wooden Wireless 
Speaker, but you should first familiarize 
yourself with the Bluetooth functionality of 
your mobile phone or other devices before 
using the Wooden Wireless Speaker. 

1X Wooden Wireless Speaker

1X 3.5mm Audio Cable

1X Mini USB Cable

1X Instruction Manual

On/Off switch

3.5mm input port

LED indicator

Mini USB port

3.5mm output port

• Turn on your phone and ensure its 

  Bluetooth function is activated.
• Turn on the speaker go to the pairing 

  mode.
• Search your Bluetooth device on your 

  phone by following the phone’s instructions. 

  Refer to your phone's user manual for 

  more information.
• After a few second the phone will list 

  the “MERKURY SPB97” as a discoved 

  device. Select it and follow your 

  phone instruction to select this pairing.
• Your phone will confirm the pairing, and 

  then press Yes/Ok.
• Finally, select to connect with 

  wireless speaker from your phone.

To use your wireless speaker, you must 

first pair your speaker with a phone or a 

computer. Once your wireless speaker is 

paired to a specific mobile phone, they will 

remain paired and automatically recognize 

each other whenever they are within range.

OFF

ON

POWER

INPUT

OUTPUT

DC IN 5V

LED indicator

Plug the Mini USB to the

port.

Use the Mini USB cable accessory provided 

with this speaker. Connect the Mini USB plug 

to the Mini USB charging port on the speaker 

positioned at      in speaker diagram on page 2. 

Connect the USB plug to a USB port on a 

computer or wall adapter to activate 

charging.

Mini USB Plug

wireless speaker,

wireless speaker,

wireless speaker.

wireless speaker.

wireless speaker

devices

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

—Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two

conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause

undesired operation.

Changes or modifications to this unit not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

SP-0272

FCC ID:2ADM5-SP0272