SMARTV LTD SP932L Manuel D’Utilisation

Aux cable embedded

Micro-USB for charging

Microphone

X Button/Power Button

X LED

Vol- Button

Bluetooth Button

Vol+ Button

Bluetooth LED

Standing sideway

Hiking

The TranXformer 1 will automatically turn on when expanded 

TranXformer 1 is the ultimate pocket speaker. With its patented 
expandable design, the TranXformer 1 produces a decent sound with 
the best bass in its class while maintaining a height of only 1 3/4 inch 
when collapsed. 

The sports jacket can be put on to the top of the unit for carrying. This provides 
a different look. It can also support the TranXformer 1 to stand sideway.

The TranXformer 1 incorporates a few technologies in order to ‘break the 
sound barrier’ in such a compact unit. With the X-Bass™ structure, the 
TranXformer triples the airspace to lower the resonance frequency for a full 
low (120-200Hz).

Secondly, a custom-made passive radiator helps to boost a deep low 
(80-120Hz). In addition, active equalization is used to provide a smooth mid 
and a clear high.

And finally, a 2-inch dual-magnet/dual-coil driver with 5 watts RMS delivers 
the most powerful and balanced sound in its class.

(SP932)

®

The TranXformer 1 needs to be paired with your mobile device first.

When first switched on, the TranXformer 1 will enter paring mode 
automatically. The Bluetooth LED will be flashing quickly during paring.

Please turn on Bluetooth via Settings, then select ‘X-1’ when it appears on 
the device list.

To enter paring mode for other devices, please hold down the Bluetooth 
button for over 3 seconds until the Bluetooth LED flashes quickly.

Bluetooth

 X - 1

Bike mount kit is included for easy 
mounting and dismounting of the 
TranXformer 1 to a bike.

When there is no Bluetooth or Aux in signals 
for over 5 minutes, the TranXformer 1 will 
automatically switch off to preserve battery 
power. To turn it on again, please press the X 
button.

Holding down the X button for 1 second will 
toggle the unit on and off.

Pressing the Bluetooth button briefly will pause/platy the music player. You 
can use the Vol+ and Vol- button to adjust the volume. 

When the phone rings, pressing the Bluetooth button once will answer the 
call in hands-free speaker phone mode. When the phone is idle, pressing 
the Bluetooth button twice will redial the number.   

The unit has a 1000mAh Li-Polymer rechargeable battery. When battery is 
low, the LED will flash in red. You can charge the unit via the micro-USB 
port. The charging time is about 3 hours.  

The average play time is 6 hours. You can monitor the battery usage on 
your mobile device. 

There are three modes for the Lightshow. Pressing the X button briefly will 
toggle between the 3 modes.

1)  On – the colors and brightness of the lights are 
synchronized with the music. If the music is turned 
down, the lights will go dark.

2)  Ambient Light - Lightshow is on when the music 
level is above 50%. The light will breathe in different 
color when the music is turned down.

3)  Off – No light at all.

2” high performance driver

Expanded chamber

Custom-made passive speaker