Hangzhou Hikvision Digital Technology Co. Ltd. I0D2100 Manuel D’Utilisation

User Manual of Network Camera

(4) Click Save to save the new settings.

Note:

A reboot is required for the settings to take effect.

6.3.5 Configuring SNMP Settings

Purpose:

You can set the SNMP function to get camera status, parameters and alarm related

information and manage the camera remotely when it is connected to the network.

Before you start:

Before setting the SNMP, please download the SNMP software and manage to

receive the camera information via SNMP port. By setting the Trap Address, the

camera can send the alarm event and exception messages to the surveillance center.

Note:

The SNMP version you select should be the same as that of the SNMP software.

And you also need to use the different version according to the security level you

required. SNMP v1 provides no security and SNMP v2 requires password for access.

And SNMP v3 provides encryption and if you use the third version, HTTPS protocol

must be enabled.



For your privacy and to better protect your system against security risks, we

strongly recommend the use of strong passwords for all functions and network

devices. The password should be something of your own choosing (using a

minimum of 8 characters, including upper case letters, lower case letters,

numbers and special characters) in order to increase the security of your product.



Proper configuration of all passwords and other security settings is the

responsibility of the installer and/or end-user.

Steps:

1. Enter the SNMP Settings interface:

Configuration > Advanced Configuration > Network > SNMP