Hangzhou Hikvision Digital Technology Co. Ltd. IPC2F Manuel D’Utilisation
Network PT Dome Camera·Quick Start Guide
15
15
1.3 WPS Connection
A wireless router with the WPS function is required to if you want to
enable the WPS function of the camera. Follow the steps below to
establish a WPS connection.
enable the WPS function of the camera. Follow the steps below to
establish a WPS connection.
1. Press the WPS button on the router.
2. Press the WPS button (about 2s) on the camera within 120s you
enable the WPS of the router to join in the wireless network.
The WPS button works as a reset button only when you press
it when the camera is powering on.
Press the WPS button on the camera, and then press the
WPS button on the router will work as well, and the expire time of
WPS connection on the camera is 120s.
WPS connection on the camera is 120s.