Hangzhou Hikvision Digital Technology Co. Ltd. K1T606MF Manuel D’Utilisation
Face Recognition Terminal User Manual
22
Note:
Numbers, upper case letters, lower case letters, and special characters are allowed in the
Wi-Fi password.
5. Tap OK to save the settings and go back to the Wi-Fi tab.
6. Tap
6. Tap
to save the Wi-Fi parameters and go back to the Home page.
Setting RS-485 Parameters
Purpose:
The face recognition terminal can connect external secure door control unit or card reader via the
RS-485 terminal.
Steps:
1. On the Communication Settings page, tap RS-485 to enter the RS-485 tab.
The face recognition terminal can connect external secure door control unit or card reader via the
RS-485 terminal.
Steps:
1. On the Communication Settings page, tap RS-485 to enter the RS-485 tab.
2. Select an external device according to your actual needs.
Note:
Unit represents the secure door control unit and Reader represents the card reader.
3. Tap Baud Rate to enter the Baud Rate page.
4. Select a baud rate for connecting external device via RS-485 protocol.
5. Tap
4. Select a baud rate for connecting external device via RS-485 protocol.
5. Tap
to save the selected baud rate and go back to the RS-485 tab.
6. Tap
to save the RS-485 parameters and go back to the Home page.