Shenzhen Cannice Technology Co. Ltd. M812 Manuel D’Utilisation
B
ASIC
O
PERATION
Clear paired list
1.When the earphone is connected to the phone, then disconnected the phone, at the same
time the earphone will enter into pairing mode.
2.Press volume "+" and volume "-" button at the same time until LED flashes blue, then LED
flashes red and blue alternately, the paired list was cleared, the earphone will enter pairing
mode after power on next time.
Hard reset
If the earphone cannot be turned on even when fully charged or does not respond during
use, follow the instructions below to reset it.
1. While holding the multifunction button, connect the earphone to your PC’s USB port or
USB power adapter with the charging cable.
2.Keep pressing and holding the Multifunction button until the earphone turns on until the
earphone turns on. Then the earphone is reset.
P
AIRING
Pair one phone
Note: When the earphone and phone have been paired once, they will automatically connect
next time when the earphone is on and Bluetooth is activated on the phone.
1.After power on,if has PDL,it will reconnect , if fail, earphones automatically enter pairing
mode (the LED indicator flashes red and blue alternately).
2.Activate Bluetooth on your phone (See below for more details).
IPhone
a. On your phone, open the Settings menu.
b. Select Bluetooth. If Bluetooth is off, turn it on. The iPhone will search for new devices
automatically.
Android phone
a. On your phone, open the Settings menu.
b. Select Bluetooth (For old Android phone, Bluetooth is found in the Wireless & Networks).
If Bluetooth is off, turn it on. Select Search for Devices if your phone does not automatically
search for new devices.
En 4
En 3