Dongguan Siyoto Electronics Co. Ltd. SMBT-4083-ANC Manuel D’Utilisation
2
a. To power on: Off mode > Hold MFB 3s Steady Green for 1 sec
b. To power off: Any mode > Hold MFB 3s Steady Green for 1 sec
Voice Prompt
a. When the headset is on, there will be the automatic voice
prompt: power on
b. When the headser is off, there will be the automatic voice
prompt: power off
c. When being connected successfully, there will be voice
telling: connected
d. When the battery is low,there will be voice
telling: low battery
Voice Telling
When there is a telephone, headphones have beep beep
Pair to your Bluetooth phone
1.Pair the Bluetooth headset for the first time
a. The distance between the Bluetooth headset and your
Bluetooth phone would be better within 1 meter when
Pairing ,the closer the better.
b. Press multifunction button for 6 seconds, the headset into
pair statuw. blinking in blue and red alternatively
c. Set the phone to search for Bluetooth device.
d. When phone finds headset, confirm by selecting
“Emirates/F1” from list.
e. Enter pin code “0000” when prompted by phone.
f. Repeat steps B-E if the pairing was unsuccessful.
g.
If the pairing is successful, accompanied by a beep, and green light flash
2. Connect to 2 devices at the same time
a. Press multifunction button for 6 seconds the headset into
pair status. Blinking in Green alternatively
b. Set the phone to search for Bluetooth device.
c. When phone finds headset confirm by selecting” Emirates/F1 ”
from list..
d. Enter pin code “0000” when prompted by phone.
e. Repeat steps B-E if the pairing was unsuccessful
f.
If the pairing is successful, accompanied by a beep, and green light flash
.Note: Bluetooth headsrt off again,re-open at this time two Bluetooth
Devices will connest automatically.