ilumi solutions inc. ILUMIBLEH Manuel D’Utilisation
Host Interface
Total
26 Multifunction I/O Lines
UART
1 UART
GPIO
14 GPIO Lines
I2C
1 I2C
SPI
2 SPI Lines
Supply Voltage
Supply
2.8V to 3.3V
Antenna Option
Horizontal
Optional either use Horizontal
Vertical
or vertical
Physical
Dimension
37X17.8X3.5mm
Weight
TBD
Environmental
Operating
-
20
°
C
to 70
°
C
Storage
-
40
°
C
to 125
°
C
Miscellaneous
Lead Free
Lead Free and RoHS Compliance
Module Keep-Out Area : - An area of 1.5mm around the module should be reversed as
akeep-out area. No component should be placed in this area.
Application Notes
1. Ensure there is no copper in the antenna keep out area on any layer of the host PCB.
Also keep all mounting hardware or any metal clear of the area to prevent affecting
proper radiation pattern.
2. For best antenna performance the module should be placed on the edge of the host
PCB and preferably in the corner with the antenna facing the corner.
3. Antenna keep out area definition comes from the module design document or can be
referred to the antenna datasheet.
4. Ensure no exposed copper under module on host PCB to avoid shorting to bottom on
the underside of the module.