Crystal Audio S.A. TEEVY Manuel D’Utilisation

T e e v y   Q u i c k   G u i d e

Thank you for purchasing Crystal Acoustics Teevy

Teevy uses a unique driver design to create a fully immersive 360° room filling musical experience, as well as convenient, compact size for placing it 
anywhere in your home.
Small yet powerful, it produces an unexpectedly deep and clear bass

.

With Teevy, you can connect numerous devices and enjoy countless hours of non compromised listening

.

Acoustic Features:
• 5 Drivers (Teevy-5MR), 6 drivers (Teevy-6MR) with Balanced Directivity for wide sound everywhere in the room
• Ideal In-Room response using WiSound technology
• Incredible Bass down to 38Hz (Teevy-5MR), 35Hz (Teevy-6MR)

     Place it

     Connect it

Connect Teevy to your devices through:
1. Optical: If available, use this connection for best quality
2. RCA: Connect both left and right channels to your device
3. AUX 3.5mm: Connect to the headphone output of your device
4. USB: Play songs from your USB HDD/Flash or charge your phone/tablet
5. Ethernet: Get network access in case of no/weak Wi-Fi signal

     Control it

Control Teevy by the included 
remote control. 

     Select it

Use the Ιnput button on the unit or on the remote control, 
to cycle between the various available options:

     Pair it [Βluetooth]

You can connect your Teevy with any Bluetooth enabled device (phone,tablet, computer, etc).

Once paired, music from your device will play through the unit. 

To add another Bluetooth device, repeat from step 2. Teevy may store up to eight paired devices in memory.

Drivers firing forward, sideways and upwards

Front-firing speakers only

Power ON/OFF

Previous Track

Play/Pause

Learning Function

Mute

Volume Up

Next Track

Volume Down

Bluetooth Pairing

Input Selector

Web Radio Presets

Blue

White

Green

Yellow

Color

Bluetooth
Optical
Aux
Wi-Fi

Input

Input colors are according to table:

Note: If in maximum volume you are experiencing 
crackling sound during heavy Bass passages, 
the protection mechanism for the amplifier and speaker 
drivers has been activated. Turn down the volume a bit!

Note: When the 3.5mm socket is used, it takes priority over the RCA input and it becomes the Auxiliary Source. In this case the RCA input is muted.
Note: To save power, Teevy will automatically turn off (in optical / line-in mode) if no sound has played through it for 30 minutes. It will automatically turn on again once it receives a signal.

1

2

3

4

5

Teevy is designed to be placed under your TV. The TV must have a 
base no wider than 580mm (Teevy 5) or 780mm (Teevy 6) and no 
deeper than 280mm (Teevy 5 & Teevy 6) and must weigh no more than 
60kg (30lbs).

If the TV base is too large to fit, place Teevy on an extra shelf under 
your TV rack, taking care not to cover the unit’s side speakers. 
Alternatively, you can mount it on the wall.

To mount your Teevy on the wall, you’ll need to drill two holes:

1.  Mark with a pen or pencil the points where you’ll drill the holes. The 
distance between the two holes is  

 

5 and 600mm for Teevy 6.

2.  Drill the holes on the wall using a drill. 

3.  Place the plugs in the holes on the wall and enter them fully (you 
may need a hammer). 

4.  Screw the mounting hooks in the plugs. 

5.  Hang your Teevy on the wall, with the high/mid drivers looking up 
and sideways. After placing it, pull gently on each side, to make sure 
that the two support points are secured.

1. Select the Bluetooth input on the remote by 
cycling Inputs. 

2. To pair a Bluetooth device to Teevy, press 
and hold the pairing button for about 5sec. 
The Bluetooth indicator LED will start blinking.

3. Consult the instructions of the device to be 
paired to connect to Teevy. Successful pairing 
will be signaled by a ‘beep’ from the unit and the 
Bluetooth indicator LED will stop blinking. 

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance 
could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against 

harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, 

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

"This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. 

This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body."