Baicells Technologies Co. Ltd. BRU3510 Manuel D’Utilisation
15
Figure 3-7 Omnidirectional Antenna Installation (1)
In principle, no lightening rod can be welded to pole (no metal object is allowed within
1m range in the horizontal direction of the omnidirectional antennas), when installing
the omnidirectional antennas. Instead, an independent lightening rod should be
settled between two poles, where the lightening rod must be high enough to keep all
antenna tops under its protection cover.
In case that an independent lightning rod is impossible due to environmental
limitation, the installation method as shown in Figure 3-8 can be adopted. Be aware
that the pole supporting the lightening rod should be kept from the omnidirectional
outdoor antennas for at least 1m away.