Conquer Industry Co. Ltd CQL1533-B Manuel D’Utilisation
CQL1533-B Bluetooth Speaker
Instruction Manual (Read before proceeding)
Power:
Works on internal rechargeable Lithium battery. Please charge your speaker fully
before first use. To charge the battery :
Using a
Micro USB cable (included), insert the jack into ”Charging” jack located at the
back of the unit and then plug the USB connecter into the USB port on a computer for
charging.
A red light aside will indicate the charging situation. When battery is full, the red light
will turn off automatically.
Bluetooth Speaker Operation
Turn on the main unit by pushing the switch at the back. A Blue light aside will start
blinking to indicate the speaker is in paring mode and searching for your Bluetooth
mobile device.
Bluetooth speaker device name is “PBT3006C”, connect it via the option menu of
your mobile device, pairing mode is 0000 if any is required. The Blue light will begin to
flashing slowly after pair is complete.
Start playing music on your device. Keep your device within 33feet (10m) of your
speaker.
Insert 3.5MM jacks of the two satellite speakers into the aux-out ports of the main unit,
when the main unit and the satellite speakers are connected via the cable, the
satellite speakers will start to play music and the side speakers on the main speaker
will stop playing.
Adjust the volume of your device to a comfortable level.
Turn off the unit when not in used.
Universal Speaker Operation
For other music devices without Bluetooth, use the attached audio input cable. Insert
the 3.5 mm jacks into the “Aux-in” jack of the man unit and into the earphone jack on
your device.
Turn on the unit and start playing music. Insert the 3.5MM jacks into the aux-out ports
of the main unit to enjoy a beautiful surrounded music.
Turn off the unit when not in used.
Caution:
This is not a toy. Please keep away from children.
Please keep away from water / heat.
Low power may cause poor connection even no working of Bluetooth.
Do not overcharge the battery.