Conquer Industry Co. Ltd CQL1575-B Manuel D’Utilisation

z  Works on internal rechargeable Lithium battery. Please charge your speaker fully 

before first use. To charge the battery : 

Using a 

Micro USB cable (included), insert the jack into the ”Aux-in Charging” hole 

located at the back of the unit and then plug the USB connecter into the USB port on 

a computer for charging.

z  A red light on the bottom will indicate the charging situation. When battery is full, the 

red light will turn off automatically. 

 

z  Turn on the unit by pushing the switch on the bottom to

   

position. A Blue light on 

the bottom will start blinking to indicate the speaker is in paring mode and searching 

for your Bluetooth mobile device. 

z  Open the Bluetooth function on your device and search the speaker named “SB-01”.   

After selecting this speaker, your device will pair without a password. (If required, 

enter the password “0000” to finalize the paring).The Blue light will begin to flashing 

slower after pair is complete. 

 

z  Start playing music on your device. Keep your device within 33feet (10meter) of your 

speaker.  

z  Adjust the volume of your device to a comfortable level.   
z  Turn off the unit when not in used.   

 

z  For other music devices without Bluetooth, use the attached audio input cable. Insert 

the Micro USB jack into the “Aux-in Charging” hole and the 3.5mm jack to the 

earphone jack on your device.   

z  Turn on the unit by pushing the OFF switch on the bottom to “Aux” position and start 

playing music. 

z  This is not a toy. Please keep away from children. 
z  Please keep away from water / heat.   
z  Low power may cause poor connection even no working of Bluetooth. 
z  Do not over charge the battery.