Conquer Industry Co. Ltd CQL1625-B Manuel D’Utilisation
CQL1625‐B Bluetooth Speaker
Instruction Manual (Read before proceeding)
Power:
Power:
z Works on internal rechargeable Lithium battery. Please charge your speaker fully before first
use. To charge the battery :
Using a Micro USB cable (included), insert the jack into ”Charging” jack located at the back of
the unit and then plug the USB connecter into the USB port on a computer for charging.
Using a Micro USB cable (included), insert the jack into ”Charging” jack located at the back of
the unit and then plug the USB connecter into the USB port on a computer for charging.
z A red light at the back will indicate the charging situation. When battery is full, the red light
will turn off automatically.
Bluetooth Speaker Operation
z Turn on the unit by pushing the switch at the back. A Blue light aside will start blinking to
indicate the speaker is in paring mode and searching for your Bluetooth mobile device.
z Bluetooth speaker device name is
“AR519”
, connect it via the option menu of your mobile
device, pairing mode is 0000 if any is required. The Blue light will begin to flash slowly after
pair is complete.
pair is complete.
z Start playing music on your device. Keep your device within 33feet (10m) of your speaker.
z Adjust the volume of your device to a comfortable level.
z Turn off the unit when not in use.
z Adjust the volume of your device to a comfortable level.
z Turn off the unit when not in use.
Caution:
z This is not a toy. Please keep away from children.
z Please keep away from water / heat.
z Low power may cause poor connection even no working of Bluetooth.
z Do not overcharge the battery.
z Please keep away from water / heat.
z Low power may cause poor connection even no working of Bluetooth.
z Do not overcharge the battery.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions (1)this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates uses and can
radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐ Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions (1)this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.