Beijing Spirit Technology Development Co. Ltd SP-L52BTDM Manuel D’Utilisation
SPRT
®
Beijing Spirit Technology Development Co.,Ltd
B. Under the state of standby mode, press【MODE】
button to enter into parameter setting mode. Use the
【MODE】button and 【FEED】button in combination,
press 【MODE】button to select the setting parameter
item, and use the 【 FEED 】 button to select the
sub-menu of parameter item.(Refer to Appendix B.)
【MODE】button and 【FEED】button in combination,
press 【MODE】button to select the setting parameter
item, and use the 【 FEED 】 button to select the
sub-menu of parameter item.(Refer to Appendix B.)
Wait for 5 seconds to save parameters value and
quit setting mode automatically.
3.2.7 Battery Charging
The battery will run out after a period of usage.
When it nearly runs out, printer will give a alarm through
the battery indicator flashing on LCD, at this time, users
need to charge up the battery.
the battery indicator flashing on LCD, at this time, users
need to charge up the battery.
The charging method is as following: connecting the
adapter to the power socket with 220V, 50HZ, then plug
the power charging plug to the power socket of the
printer, so the power charging begins. During the course
of power charging, the charging indicator 【CHARGE】
goes red, and【CHARGE】turns to green when the
charging is full.
the power charging plug to the power socket of the
printer, so the power charging begins. During the course
of power charging, the charging indicator 【CHARGE】
goes red, and【CHARGE】turns to green when the
charging is full.
Please don’t use printer when it’s charging.
13