Inspire Medical Systems Inc. 2500 Manuel D’Utilisation
22 English
Inspire Sleep Remote
200-161-101
Rev A
3032PatEN_ch4.fm 10/30/15 8:55 am
4.625 x 6 inches (117 mm x 152 mm)
Inspire Medical Confidential
Inspire 002
Audio Tones
When audio tones are turned on, the sleep remote beeps
when a change to the therapy settings is successfully
completed.
when a change to the therapy settings is successfully
completed.
Audio tone: Means:
Two beeps
with a rising
tone
with a rising
tone
• Your change was successful.
Three rapid
beeps
beeps
• Your change was not successful, because the sleep
remote was unable to communicate with your
generator. Try the change again. (For instructions on
positioning your sleep remote, refer to page 24.)
generator. Try the change again. (For instructions on
positioning your sleep remote, refer to page 24.)
• You tried to increase the stimulation strength outside
the range set by your doctor, and you have reached
the upper limit. (For instructions on increasing your
stimulation strength, refer to page 32.)
the upper limit. (For instructions on increasing your
stimulation strength, refer to page 32.)
• You tried to decrease the stimulation strength outside
the range set by your doctor, and you have reached
the lower limit. (For instructions on decreasing your
stimulation strength, refer to page 33.)
the lower limit. (For instructions on decreasing your
stimulation strength, refer to page 33.)
Six rapid
beeps
beeps
• Communication with your generator was interrupted by
electromagnetic interference. Move away from
potential sources of interference, and try again.
potential sources of interference, and try again.