Assistive Technology Products Inc HYDRADATA Manuel D’Utilisation

[Pick the date]

CONFIDENTIAL

THIS DOCUMENT REPRESENTS PROPRIETARY INTELLECTUAL PROPERTY OF ASSISTIVE TECHNOLOGY PRODUCTS,

INC (ATP) AND MAY NOT BE USED OR REPRODUCED IN WHOLE OR PART WITHOUT THE WRITTEN PERMISSION OF ATP,

The HydraData system consists of 2 items. The first is the HydraData device that will monitor fluid

intake. The unit can be used in conjunction with a back pack water supply or, with the included straw

with a simple cup. In either case, installation in the back pack or mounting of the straw valve must be

done to insure flow of water is in the proper direction. The image below shows the orientation

required, where the inlet end of the device is connected to the water supply side and the outlet end is

connected to user end, either the straw or the tubing from the back pack. The HydraData device has 2

elements, the transmitter and the disposable fluid path. To assemble the disposable fluid path, slide it

into a receiver on the back of the transmitter being careful to fully seat the disposable fluid path into the

receiving slot.

The second element of the system is the Hydradata application. This application is loaded onto an

approved mobile device or tablet. This device must be running android version 4.4.2 or later software

and be Bluetooth LE compatible (contact ATP if there are any questions of capability of your device).

Inlet End

Outlet End