Mason Target Systems LLC 100LR01A Manuel D’Utilisation
Patent Pending
22
Troubleshooting Target
(See Electronics page for LED light indicators)
1) iPad isn’t connecting to base station
i. Restart all electronics by turning on/off
ii. Check that both base station and iPad are charged
ii. Check that both base station and iPad are charged
and turned on
iii. Check that base station is within 10 feet of iPad
iv. Check that the base station is available for pairing and
iv. Check that the base station is available for pairing and
not paired with a different device
2) Base station isn’t connecting to target computer
i. Restart all electronics by turning on/off
ii. Make sure you have line of sight to the target and are
ii. Make sure you have line of sight to the target and are
in operating range
iii. Check that both base station and target computer are
charged and turned on
iv. Check target computer status LEDs for pairing state.
Target computer might be paired to a different
nearby base station. Disconnect other base station
from target computer through app. Otherwise force
unpair
nearby base station. Disconnect other base station
from target computer through app. Otherwise force
unpair
3) You aren’t receiving any feedback or random shot feedback
i. Shooting faster than 2 bullets per second may cause
false readings due to excessive vibration
ii. Restart all electronics by turning on/off
iii. Check that you are connected to the correct base
iii. Check that you are connected to the correct base
station and target computer
iv. Make sure your mobile device is Bluetooth paired
with your base station
v. Check that sensors are connected to the proper
target computer port
vi. Check for bolt damage due to direct bullet impacts
vii. Check that you are in an active firing session within
vii. Check that you are in an active firing session within
the app