DeLOCK USB 3.0 19-pin/SATA 7-pin - 1 x Multiport 82978 Fiche De Données

Codes de produits
82978
Page de 1
DATA SHEET
WWW.DELOCK.COM
Description
Specification
© 2011 by Delock. All names and symbols mentioned here are property of the respective producer. 
Printing errors, changes and errors excepted.
Ref. 
EAN
Country of origin
Customs tariff number
Slot bracket USB 3.0 pin header 19 pin + 
SATA 7 pin internal 
> 1 x Multiport external
This slot bracket by Delock can be 
installed into a standard PC slot and 
expands your system by an external 
Multiport. The Multiport interface is a 
combination of USB 3.0 and eSATAp, 
which provides different connecting 
options. Thus the Multiport enables you 
to connect devices, like e.g. Hubs, Card 
reader, external enclosure etc. with the 
following interface:
1. USB 3.0 
2. USB 2.0 
3. eSATAp (Power Over eSATA 5 V) 
4. eSATA 
• Connector: internal 1 x 19 pin USB 3.0 pin header female 
                                 + SATA 7 pin
                    external 1 x Multiport female
• Cable gauge: 28 AWG 
• Current output: max. 900 mA per each USB port
• Voltage: 5 V
• Data transfer rate up to: 
  Super-Speed 5 Gb/s, High-Speed 480 MB/s                               
  Full-Speed 12 Mb/s, Low-Speed 1.5 Mb/s,  eSATA 3 Gb/s     
• Downwards compatible to USB 2.0 and USB 1.1
• Cable length: ca. 45 cm (without connector)
System requirement
• PC with a free slot
• Mainboard with a free 19 pin USB 3.0 pin header connector 
   and a free SATA port
Note: For operation of a device which require more than 
          900 mA you may need to connect an 
          additional power supply for the connected device.
Package content
• Slot bracket
Package
• Delock poly bag
82978
4043619829781
China
84718000