Nivato Internation LTD. BTBEANIE Manuel D’Utilisation
In the case of without permission, please do not use Bluetooth Beanie nearby hospital or
medical equipment. If you are using other personal medical devices such as pacemakers, please
consult your equipment manufacturers, to determine whether the device can be shielding
electromagnetic radiation. You can also consult a physician to obtain such information.
medical equipment. If you are using other personal medical devices such as pacemakers, please
consult your equipment manufacturers, to determine whether the device can be shielding
electromagnetic radiation. You can also consult a physician to obtain such information.
Place
It is recommended Beanie if you do not use this product, please place it in the place where is
not affected by extrusion. Extrusion is likely to cause the damage of the product or physical
damage.
not affected by extrusion. Extrusion is likely to cause the damage of the product or physical
damage.
Children
Don't let children play with Bluetooth Beanie, one of the detachable small parts, are likely to be
swallowed and dangerous.
swallowed and dangerous.
Note: In the process of using, please make sure Beanie your mobile phone or other Bluetooth
device and your stereo Bluetooth music Beanie distance within 10m, If there are obstacles such
as walls, Transmission distance would be shortened accordingly.
device and your stereo Bluetooth music Beanie distance within 10m, If there are obstacles such
as walls, Transmission distance would be shortened accordingly.
Charging / Recharge
1. Charge: Before the first time use stereo Bluetooth Beanie please charge the battery to full
state, it will take at least 2.5 hours.
state, it will take at least 2.5 hours.
2. Recharge
:
In the switch on state, when the battery is low, the red LED will flashing and Voice
prompt “battery Low”. Please plug your charger, while charging, the red LED will lights up, when
the battery is full the blue LED lights up. The whole process will takes about 2 hours.
the battery is full the blue LED lights up. The whole process will takes about 2 hours.
Switch ON/OFF
Switch ON
Please press the
button and hold about 3 seconds, until the blue LED flashing 2 times or
heard “Power On" sound from the speaker, then release the button, Bluetooth Beanie will boot
on at this time.
on at this time.
Note: After switching on the Bluetooth Beanie, Bluetooth Beanie will automatically back to the
last connected device.
last connected device.
Switch OFF