Roseman Engineering Ltd. 2288 Manuel D’Utilisation
998 Old Eagle School Road, Suite 1215
|
Wayne, Pennsylvania 19087
|
T: 610-225-8350
|
F: 610.971.9447
|
www.assetworks.com
44
11
Appendices
Appendix A: Capturing Vehicle Data
11.1.1
Connect the FJ3 to an OBD II Connector (Light Duty Vehicle)
If the vehicle has an OBD II connector, perform the following:
1. Run a twin wire cable from the vehicle connector to the FJ3.
2. Connect the FJ3 CAN_H to pin 6 of the OBD II connector.
2. Connect the FJ3 CAN_H to pin 6 of the OBD II connector.
3. Connect the FJ3 CAN_L to pin 14 of the OBD II connector.
Note
Optional Power Supply Connection
It is possible to supply the power to the FJ3 from the OBD II connector as
follows:
follows:
- Connect Pin 16 to BATT (+) on the FJ3.
- Connect Pin 4 to BATT (-) on the FJ3.