Shenzhen Hangshi Technology Co. Ltd S29 Manuel D’Utilisation

1. Do not disassemble or modify the headphone in any reason.Otherwise 

headphone can be malfunctioned orburnt.In this case the headphone

is out of warranty coverage. 

2. Keep it away from any corrosive liquid.Otherwise it could cause serious 

damage to headphone.Any damage caused by touching corrosive liquid 

is not in warranty of manufacturer. 

3. Do not use it in thunderstorm weather.Thunderstormcan cause

headphone doesn't work properly and increase the risk of electric shock.

4. When pulling out the plug,please be sure to hold Micro USB port cable

of headphone.

5. Do not overly oppress headphone cable,it may cause interruption or

    

    destroy to circuit.

6. For the cleanness and hygiene of headphone,please often disassemble  

    

    silicone earphone tips and use mild detergent to clean.Keey headphone  

      

    dry and clean when not in use.

Please read safety instructions carefully before using.
1.Please do not use corrosive liquid to clean headphone. 
2.Please keep headphone away from high temperature flame or fire.
3.Please avoid headphone falling from a height.
4.Please do not let headphone get touch with corrosive liquid. 
5.Please do not charge headphone long-time over charging time.
6.Please do not disassemble headphone unauthorizedly.

To avoid damage to your hearing, please ensure that your music volume
is small when wearing headphone. After wearing well,Please adjust to an 
appropriate volume.In case of hearing damage,please do not long-time 
use loud volume to listen to music.Please be responsible for your hearing. 

Warm reminder

Model

Audio decode

The noise reduction

Bluetooth version

Main control chipset

Support agreement

Bluetooth distance
Working time

Charging time

Standby time

S29

APT-X

CVC 6.0

Bluetooth 4.1

CSR 8645

HFP/HSP/A2DP/AVRCP

≥10M
14H

1.5-2H

≥360H

Battery capacity

Speaker unit

3.7V , 100mAhx2

φ8.2MM

Waterproof level

IPX4

Response frequency

20Hz-20KHz

System compatibility

iOS/Android/Windows

S29

      User Manual

Headphone

Right

Left

1. Low battery status: Red light flashes every 5 seconds, you will hear 

“Battery low” voice prompt from the earphone evry 3 minutes;

2. Charging status: Red light keeps on.
3. Fully charge status: Blue light keeps on.

LED indicator

Redial 

last calling

Indicator flashes blue,

then flashes red 

Indicator keeps red for 1 sec,

then goes off

Key 3 sec.

Key

Key

Key

Key

Key

Key

Key

Key

Short

Short

Key

Short

 2 times.

 2 times.

 turns on.

Double

Key

Double

2

1. Identify the left and right earbuds and ear-fins. 

earphones.

4. Adjust the positioning to get a snug 

PLEASE NOTE: 

Using appropriate size 

maximum external noise isolation and a 

·Select S29 from the dvice list, click S29 and wait for a moment;

·You will hear “connected” from the earphone after successful connecting.

3. Insert the assembled earphones into to your ears like 

shown in the lower left corner images.

the eartips and ear-fins one size at a time

to find the best fit for each side. 

· Long press Power button on the earphone for 3 seconds ,

  do not lose your finger

· You will hear “Power ON” voice prompt from the earphone, keep 

  pressing Power button until you hear  “Pairing” voice prompt.

 NOTE: This equipment has been tested and found to comply 

with the limits for a Class B digital device, pursuant to part 15 of 

the FCC Rules. These limits are designed to provide 

reasonable protection against harmful interference in a 

residential installation. This equipment generates uses and can 

radiate radio frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful 

interference to radio communications. However, there is no 

guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference 

to radio or television reception, which can be determined by 

turning the equipment off and on, the user is encouraged to try 

to correct the interference by one or more of the following 

measures: 

- Reorient or relocate the receiving antenna. 

- Increase the separation between the equipment and receiver. 

-Connect the equipment into an outlet on a circuit different from 

that to which the receiver is connected. 

-Consult the dealer or an experienced radio/TV technician for 

help

Changes or modifications not expressly approved by the party 

responsible for compliance could void the user's authority to 

operate the equipment. 

This device complies with Part 15 of the FCC Rules. Operation 

is subject to the following two conditions: 

(1) this device may not cause harmful interference, and (2) this 

device must accept any interference received, including 

interference that may cause undesired operation.