Melnor Inc. 15043C Manuel D’Utilisation

15043_INS_E_00

This guide will help you connect your

WiFi AquaTimer to your home WiFi network using a

smartphone or tablet.
After the initial setup, you can program your timer from

a smart phone, tablet or computer.
If at any time you need assistance, feel free to

contact our support toll-free at:
844-MELNOR1 (844-635-6671)
or by email at: wifisupport@melnor.com

After opening the package, please ensure you

have all parts.

• Valve Unit

• Control Unit

• Yellow Setup Tool

• Power Adapter

Install batteries in the Valve Unit.

You will need to supply
4 alkaline AA batteries.
Ensure the battery

cover is locked.

Note: Do not use lithium

or rechargable batteries in this product.

Determine the best location for the

Control Unit. The Control Unit will

need to be plugged in at all times.
It needs to be located in an area that

has good WiFi signal as well as within

200 feet of the Valve Unit.
Walls, electrical equipment and other

materials may affect this range.

On your smart device, download and

install the “Melnor AquaTimer

Configuration” app.
Before launching the app,

proceed to step 8.
The app is only used to

connect the timer to your home

WiFi network.

Ensure that your smartphone or tablet is connected

to the WiFi network you want to use

for your WiFi AquaTimer.
If not, switch your WiFi

network in the smart

device settings.
This is for setup only. Once

connected, you can control

your timer from anywhere.

Use the included power

adapter to connect the

Control Unit to an

indoor wall outlet.
You should see

flashing LED lights,

alternating between

“STATUS” and

“CONFIG”.

Setup Guide

If you discover that you are missing a part, please contact us:

844-MELNOR1 or wifisupport@melnor.com