ZINUS Co. Ltd ZM1000 Manuel D’Utilisation

 

The JCYK-09-3 Remote Handset Use Manual 

 

The position of S1-S10 button on the operation panel as following: 

 

 

S1  Save 

Ysection 

Zsection 

Xsection 

S10  actuator/massage motor selection 

S2 Up 

S3    select motor towad left 

S4 select motor toward right 

S5  Down 

S6   Save1 

S7   Save2 

S8   Save3 

S9   Save4 

Introduce the use of the JCYK-09-3 remote handset in details: 

At first, we should divide the LED into three parts:Xsection,Ysection and 

Zsection.As indicated above. 

1. When power on, all the actuators reset to keep the bed in FLAT.(If the RESET 

couldn’t finished normally, it is possibly the battery supply power to controller. Here, 

we can take the battery fuse which on the top of the controller case down in order to 

finish the Reset.) 

2. Move the push-button S10 to “B”, then press S3 or S4 to lighten X section of LED. 

At this moment, Press S2 continuously, the bed HEAD move up: loosen it, the bed 

HEAD stop moving. 

  Press S5 continuously, the bed HEAD move down: loosen it, the bed HEAD stop 

moving. 

When in the process of M1, press the safety switch L1, M1 stop falling. loosen the 

safety switch,M1 Continue to decline .