Zebra 01406-000 Manuel D’Utilisation
Operation
Installing a Paper Roll
Installing a Paper Roll
20
P1003643-001
TTP 1020™/TTP 1030™ Technical Manual
03/03/2009
Installing a Paper Roll
1.
Turn the new paper roll as shown. The paper should be inserted into the printer with the
temperature-sensitive side up.
temperature-sensitive side up.
Figure 8 • Turn the paper roll so that the paper leaves the roll from the top
2.
Tear off approximately 0.5 m from the new paper roll.
Figure 9 • Tear off 0.5 m from the new paper roll
3.
Make sure the printer is turned ON.
Caution •
The above step is important since the outer end of the paper is usually fixed to
the roll with some type of glue or self-adhesive substance that might otherwise cause paper
jam or even print head damage.
jam or even print head damage.