Dataram DRH1333RL/16GB Fascicule
DRH1333RL
DDR3-1333, PC3L-10600, Registered, ECC, 1.35V, 240-pin DIMMs
DRH1333RL
29-Apr-11
Products in Family
DRH1333RL/4GB (1 x 4GB 1Rx4 DIMM)
DRH1333RL/8GB (1 x 8GB 2Rx4 DIMM)
DRH1333RL/16GB (1 x16GB 2Rx4 DIMM)
DRH1333RL/8GB (1 x 8GB 2Rx4 DIMM)
DRH1333RL/16GB (1 x16GB 2Rx4 DIMM)
Features Description
240-pin JEDEC-compliant DIMMs
133.35 mm wide by 30 mm high (1.181” x 5.25”)
Data Transfer Rate: 10.6 Gigabytes/sec
Operating Voltage: 1.35 V ±0.075 (1.5 V tolerant)
Fully RoHS Compliant
Thermal Sensor
Heat Spreader
133.35 mm wide by 30 mm high (1.181” x 5.25”)
Data Transfer Rate: 10.6 Gigabytes/sec
Operating Voltage: 1.35 V ±0.075 (1.5 V tolerant)
Fully RoHS Compliant
Thermal Sensor
Heat Spreader
Each DRH1333RL upgrade consists of a single DDR3-
1333 Registered DIMM that conforms to JEDEC’s DDR3,
PC3L-10600 standard. One 2K-bit EEPROM is used for
Serial Presence Detect and a combination register/PLL
with Address and Command Parity is also used. A
thermal sensor accurately monitors the DIMM module
and can prevent exceeding the maximum operating
temperature of 95C.
1333 Registered DIMM that conforms to JEDEC’s DDR3,
PC3L-10600 standard. One 2K-bit EEPROM is used for
Serial Presence Detect and a combination register/PLL
with Address and Command Parity is also used. A
thermal sensor accurately monitors the DIMM module
and can prevent exceeding the maximum operating
temperature of 95C.
Dataram Product
HP Product
Supported in these HP systems:
DRH1333RL/4GB
DRH1333RL/8GB
DRH1333RL/16GB
DRH1333RL/8GB
DRH1333RL/16GB
604504-B21
604506-B21
627812-B21
604506-B21
627812-B21
ProLiant BL2x220c G6/G7, BL280c G6, BL460c G6,
BL490c G6, WS460c G6, DL320 G6, DL360 G7, DL380
G7, DL1000, ML330 G6, ML350 G6, SL160z G6, SL170x
G6, SL2x170z G6
BL490c G6, WS460c G6, DL320 G6, DL360 G7, DL380
G7, DL1000, ML330 G6, ML350 G6, SL160z G6, SL170x
G6, SL2x170z G6
Notes
Tolerances on all dimensions
except where otherwise
indicated are
except where otherwise
indicated are
±.13 (.005).
All dimensions are expressed
in millimeters [inches]
in millimeters [inches]
Copyright
© 2011 Dataram Corporation | U.S.A. Headquarters +1 609-799-0071 | Offices in Europe and Asia | www.dataram.com
The information contained in this document has been carefully checked and is believed to be reliable and accurate. However, Dataram assumes no responsibility for errors.