US Robotics Wireless USB Adapter USR805422 Guide De Montage

1

USR5462 802.11g 54Mbps Router

One (1) Ethernet cable

19VAC Power Supply

USR5422 54Mbps USB Adapter

Installation Guide

Installation CD-ROM

Note: It is important that you have your serial number written down before you install the 
802.11g 54Mbps Router. You can find your serial number on the bottom label of the 

802.11g 54Mbps Router. If you ever need to call our Technical Support department, you 

will need this number to receive assistance.

Note: Be sure to find out what letter your CD-ROM drives uses before you begin installing 
your new product. You will need to know this to properly install your software.

• Turn off your computer and your cable or DSL modem. 
• Locate the Ethernet cable from your cable or DSL 

modem that is connected to your computer’s Ethernet 

adapter. 

• If your broadband is connected, disconnect that Ether-

net cable from your computer’s Ethernet adapter.

• Use the Ethernet cable to connect your cable or DSL 

modem to the WAN port on the rear of the 802.11g 

54Mbps Router.

Note: Some cable or DSL modems can be connected using either a USB cable or an Ether-

net cable. To connect your cable or DSL modem to the 802.11g 54Mbps Router, you must 

use an Ethernet cable.

Model Number

Serial Number

USR5462