HID Identity DuoProx II 1336NGSSN Manuel D’Utilisation
Codes de produits
1336NGSSN
125 kHz How to Order Guide - D00530, B.7
Page 10 of 44
© 2007 – 2012 HID Global Corporation. All rights reserved.
February 2012
168/169 Style - ProxCard
®
Plus Card Ordering Form
Instructions
1. Select one option from each category (1-5) and mark the appropriate box.
2. Complete the Programming Information and Company Information Sections.
3. Fax the completed Ordering Guide to HID’s North Haven, CT, office at 1-203-407-5967, Attn.: Customer Service.
4. HID Corporation will determine the correct part number based on the options you specify, and fax you the part number and specification
sheet.
5. Place an order for the ProxCard Plus card with the part number provided by HID.
Card Thickness: 0.047” ± 0.004” - Check with your printer manufacturer to verify card printability
- Magnetic Stripe applications: Verify reader slot width.
Style 168 card = Non-printable surface, Matte Finish
Style 169 card = Printable surface, Gloss Finish
1. Card Front
ProxCard Plus Artwork
Plain White
1
Custom Artwork (500 Min.)
2. Card Back
Plain White
Custom Artwork (500 Min.)
3. Card Finish
Matte Finish
Gloss Finish
NOTE: Cards are manufactured with similar front and
back side finishes only, (i.e. Matte/Matte or Gloss/Gloss)
4. High Coercivity Magnetic Stripe
Front
Back
None
5. Slot Punch
3
No Slot Punch
(Printed halo of horizontal slot punch will remain)
Horizontal Slot Punch
4
6. Card Style (Wiegand Code Strip Location)
A (If unsure, or card is to be used in a mixed reader environment, please
contact the factory)
A1
Notes:
Please call customer service for availability, minimum order requirements, and a quote for custom
cards.
1
Cards ordered with plain white front and back packaging, with no HID artwork or custom artwork,
will have a small “HID” printed in the lower right-hand corner and a horizontal slot punch halo target
printed on the back of the card.
2
The external card number is ink jet printed in the lower left-hand corner on the back of the card.
Zero gap numbering is not available. The external PIN numbers will be associated with the
Wiegand programming unless otherwise specified.
3
Some video imaging printers cannot accommodate pre-slot punched cards. Please consult with
the printer manufacturer prior to printing.
4
Consult customer service for vertical slot punch.
Programming Information (Wiegand):
Facility Code: “A” Field
.
“B” Field
.
(if required)
Bit Format:
.
Internal PIN Start No:
External Card Numbering
2
:
.
Front Back
Matching PIN
Non-Matching Sequential Start No.:
Non-Matching Start No. (Random):
None
Programming Information (Proximity):
(If different than Wiegand Programming Info)
Facility Code: “A” Field
.
“B” Field
.
(if required)
Bit Format:
.
Internal PIN Start No:
.
Total Qty.: (100 Min.)
.
.
Company Information:
Company Name:
.
Contact:
.
Address:
.
City:
.
State:
.
Zip Code:
.
Phone:
.
Fax:
.
For Internal Use Only (To be Completed by HID):
ProxCard Plus Part Number:
Part No.: 1 6 8
or 1 6 9
.
Issued By:
Date:
.