HID Identity DuoProx II 1336NGSSN Manuel D’Utilisation
Codes de produits
1336NGSSN
125 kHz How to Order Guide - D00530, B.7
February 2012
© 2007 - 2012 HID Global Corporation. All rights reserved.
Page 19 of 44
CXKEY - CX Keytag Ordering Guide
Standard Part No.:
CXKEY-SSSS-0000
Description:
125 kHz, printed Indala logo on front side, printed strip for marking on back side.
CXKEY
S
S
S
S
0000
BASE NUMBER
PROGRAMMING
FRONT GRAPHICS
BACK GRAPHICS
MARKING POSITION
CUSTOM FILE NO.
BASE NUMBER
CXKEY Keytag style proximity card
PROGRAMMING
S = Standard Programmed, Low Frequency 125 kHz – CASI-RUSCO
12-digit format with no external
marking number. Marking of “CXdddy” is standard.
M = Sequential Matching. Programmed, Low Frequency 125 kHz – CASI-RUSCO
12-digit format with
matching (6-digit) external marked number. Note: the programmed internal number of a CASI card is a
12-digit ID number, example 151234123456. When Matching external numbers are requested, only the
last six digits of the 12-digit encoded number are printed on the card along with the CX designation and
a date code. For the sample number shown, the marking would be “CXdddy 123456” A cross
reference of marking to encoded number will be provided with the order in .txt (text) format
12-digit ID number, example 151234123456. When Matching external numbers are requested, only the
last six digits of the 12-digit encoded number are printed on the card along with the CX designation and
a date code. For the sample number shown, the marking would be “CXdddy 123456” A cross
reference of marking to encoded number will be provided with the order in .txt (text) format
Q = Sequential Non Matching. Programmed, Low Frequency 125 kHz – CASI-RUSCO
12-digit format with
a sequential 6-digit external marked number with a customer specified start number. (For example, if
2000 cards are ordered with a starting marking number of 425000, the marking would start at “CXdddy
425000” and end at “CXdddy 426999”) A cross reference of marking to encoded number will be
provided with the order in .txt (text) format.
2000 cards are ordered with a starting marking number of 425000, the marking would start at “CXdddy
425000” and end at “CXdddy 426999”) A cross reference of marking to encoded number will be
provided with the order in .txt (text) format.
FRONT GRAPHICS
S = Standard (printed Indala logo)
C = Custom (Artwork on file or new)
BACK GRAPHICS
S = Standard (no logo, printed strip for marking)
C = Custom (Artwork on file or new)
MARKING POSITION
(Standard Marking (the CX designation and a date code), is used unless otherwise specified)
Note: Inkjet marking is surface printed and, therefore is not to be considered permanent.
Most Keytag marking will be with Laser etching which is permanent in most applications.
Note: Inkjet marking is surface printed and, therefore is not to be considered permanent.
Most Keytag marking will be with Laser etching which is permanent in most applications.
S = Standard (back side on printed strip)
CUSTOM FILE NUMBER (4 Characters – Factory Assigned)
0000 = No Artwork
(Call your Customer Service Representative for new artwork)