HID Identity DuoProx II 1336NGSSN Manuel D’Utilisation
Codes de produits
1336NGSSN
125 kHz How to Order Guide - D00530, B.7
February 2012
© 2007 - 2012 HID Global Corporation. All rights reserved.
Page 25 of 44
DuoProx
®
II Cards
Company Name:
PO No.
Date
Quantity:
Card and Artwork File No.
1. External Number:
Standard Location: The standard external # location is shown on the template below. The external # can only be printed on
the back of the card. The external # will be printed in the standard location, unless otherwise specified.
Custom Location: Please indicate the desired external # location by writing "12345" on the appropriate template. The external
# can only be printed on the back of the card.
2. An Artwork File Number is placed on each card. The standard location is indicated by the "CCCCC". The standard location
for the custom artwork number is on the back side of the card. Please indicate/incorporate the artwork number on the artwork.
If there will be front side printing only, the custom artwork number will be placed on the printed side, opposite the standard
location.
3. Artwork Placement: Please indicate the placement of your artwork on the template below. Custom artwork must clear the
slot punch locations, edges and magnetic stripe by a min. of 0.125".
4. Magnetic Stripe: If the location of the magnetic stripe is custom (other than standard) and/or if other types of magnetic
stripes are to be added to the card (i.e. Debitek stripe), indicate the location(s) of the magnetic stripe(s) on the template.
Standard Location
Custom Location
DuoProx
®
II Card Artwork Templates
Notes:
1. External # location reads in the direction as shown. External # character height is approximately 0.1".
2. Cards will have a small “HID logo” "
" and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card.
3. A standard custom artwork file number is printed on the back side of the card. Front side printing of this same number is an option.
4. Slot punch location "indicators" will appear on the back side of the card only.
5. Do not order slot punched cards for use in dye sublimation printers.
Slot edge may damage the printer ribbon. Slot should be punched after dye sublimation printing.
6. Some video imaging printers cannot accommodate pre-slot punched cards. Please consult with the printer manufacturer prior to ordering.
Name:
Signature:
Date:
.
Slot Punch Indicators
Back
Front
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
YYYYYYYY-YY = Sales Order Number