Zalman CNPS7000B-Cu Intel/AMD CPU compatible fan CNPS7000B-CU Manuel D’Utilisation

※

The specifications of any product may change without prior notice to improve performance.

3

All speeds of Pentium 4 Socket 478 CPUs up to 3.4GHz

When using 3.4GHz Northwood CPU or Prescott CPUs of 2.8A/E GHz or faster, please refer to the
following table to set the fan speed accordingly for sufficient cooling.

6. Compatible CPUs

①

As shown in Figure 2, a motherboard that is not compliant with the

“10.2mm Motherboard

component height restriction

”standard, introduced by Intel, may create interference between

components and the clip. Please do not install the CNPS7000B if this interference is observed.

② No components higher than 39mm (possible examples : PSU, graphics card, RAM, etc.) should

be present within a 55mm radius from the center of the CPU to install this product.

③ For more information, please visit the Zalman website (http://www.zalman.co.kr) and click on“Compatibility 

between CNPS7000(A/B) and Socket 478 Pentium 4 Motherboards

”link.

All CPUs conforming to Socket 462 platform

① This product requires “Heatsink Attach Holes”around the

CPU socket as shown on the right.

② No components higher than 39mm (possible examples : PSU,

graphics card, RAM, etc.) should be present within a 55mm
radius from the center of the CPU to install this product.

③ This product cannot be installed if any motherboard component

(usually capacitor) taller than 15mm is located under the clip.

④ For more information, please visit the Zalman website

(http://www.zalman.co.kr) and refer to

“CNPS7000(A/B) Compatible

Socket 462 Motherboards List

”link.

②

①

③

10.2mm  Motherboard component height restriction

Clip

Clip

Motherboard

Component

Motherboard Component

< CNPS7000B Fan Speed Table >

CNPS7000B-AlCu
CNPS7000B-Cu

2,500rpm or faster
2,200rpm or faster

※ Fan speed of 2,500rpm can be obtained by directly connecting 3-pin fan connector to motherboard. (Without Fan Controller)