Rose PO-8P Fascicule
Porter
W W W . R O S E . C O M
Code Activated Switch
Four or eight ports
Serial or parallel
Configuration menu
Broadcast mode
64K buffer, expandable to 256K buffer
Broadcast mode
64K buffer, expandable to 256K buffer
Features and Benefits
Versatile, code activated switch designed to send
serial or parallel data from a single computer or
terminal to one of several devices
serial or parallel data from a single computer or
terminal to one of several devices
Available in serial (RS232) or parallel (Centronics)
RS422 option is also available
RS422 option is also available
LEDs on the front panel show buffer capacity, data
flow, and busy status
flow, and busy status
Advance to next port and port selection switches
provide easy switching to a selected port
provide easy switching to a selected port
Broadcast mode sends data simultaneously to all
ports
Can be used as a serial console switch
Data collection command shows buffer data
Null command disconnects from all ports
Format command allows a port's protocol to be
reconfigured, useful for modem communication
Wait/go command pauses/resumes data flow on a
selected port, also controls the port's DTR signal
selected port, also controls the port's DTR signal
Copy command sends multiple copies of the
buffer data to a selected port
Read DSR command reports the port's DSR line
status (high or low)
status (high or low)
Made in USA
The Porter™ Advantage . . .
The Porter is a very versatile, code activated switch
that allows a computer or terminal to send serial or
parallel data to a selected device. Each port (4 or 8)
can be configured to match the connected
equipment's protocol.
The Porter is easy to install and uses commonly
available cables. It works with any device with serial
or parallel ports. The serial connectors are DB25F and
the parallel connectors are Centronics 36 pin female.
that allows a computer or terminal to send serial or
parallel data to a selected device. Each port (4 or 8)
can be configured to match the connected
equipment's protocol.
The Porter is easy to install and uses commonly
available cables. It works with any device with serial
or parallel ports. The serial connectors are DB25F and
the parallel connectors are Centronics 36 pin female.
The receive buffers accept data on all ports
simultaneously. This data can then be read from the
master port one at a time. The Porter transmits from
buffers on all ports simultaneously. The “clear buffer”
command purges all data in a port’s buffer. The
broadcast feature allows you to send data
master port one at a time. The Porter transmits from
buffers on all ports simultaneously. The “clear buffer”
command purges all data in a port’s buffer. The
broadcast feature allows you to send data
simultaneously on all ports. The Porter’s buffer is
expandable to 256K bytes.
expandable to 256K bytes.
These are a few of the features that make the Porter
one of the best code activated switches on the
one of the best code activated switches on the
market. Call us today about your code-activated
switch application.
switch application.
Send data simultaneously
to all ports