High Power HP-850-G14C Manuel D’Utilisation
Switching Power Supply Specifications
Page 4
1. General
1.1 Scope
This specification defines the performance characteristics of a single phase 850 watts, 8
output power supply : +5V, +12V1, +12V2, +12V3, +12V4, -12V, +3.3V & +5VSB,and it
will provide power to all system components. This specification also defines worldwide
safety and electromagnetic compatibility requirements for the power supply which is
intended for use in computer products.
2. Input Characteristics
2.1 Input Voltage
Nominal Voltage
Voltage Variation Range
---------------------
----------------------------
100 - 240 Vrms
90 - 264 Vrms
2.2 Input Frequency
Nominal Frequency
Frequency Variation Range
------------------------
--------------------------------
50-60 Hz
47 Hz to 63 Hz
* The power supply must operate at above frequency with 90-264 VACrms input voltage
range.
2.3 Max.Input AC Current
Max.Input Current
Measuring Range
------------------------
-----------------------
11A 100-240 Vrms
2.4 Inrush Current
The power supply must meet inrush requirements for any rated AC voltage, during turn on
at any phase of AC voltage, during a single cycle AC dropout condition, during repetitive
ON/OFF cycling of AC, and over the specified temperature range. The peak inrush current
shall be less than the ratings of its critical components (including input fuse, bulk rectifiers,
and surge limiting device).
2.5 Efficiency
HP-850-G14C provides an efficiency of 80% minimum when measured at Light Load、
Typical Load and full load under 115V/60Hz & 230V/50Hz condition.