Transition Networks S6120-1013 S6120-1013-NA Fascicule
Codes de produits
S6120-1013-NA
The ION Platform
Ordering Information
S6120-1011
1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
to (4) RJ-48
[1.5 km/0.9 mi.]
plus 10/100BASE-TX (RJ-45)
[100m]
S6120-1013
1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
to (4) RJ-48
[1.5 km/0.9 mi.]
plus 10/100BASE-TX (RJ-45)
[100m]
S6120-1014
1310nm single mode (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
to (4) RJ-48
[1.5 km/0.9 mi.]
plus 10/100BASE-TX (RJ-45)
[100m]
S6120-1015
1310nm single mode (SC)
[40 km/24.9 mi.] Link Budget: 29.0 dB
to (4) RJ-48
[1.5 km/0.9 mi.]
plus 10/100BASE-TX (RJ-45)
[100m]
S6120-1016
1310nm single mode (SC)
[60 km/37.3 mi.] Link Budget: 32.0 dB
to (4) RJ-48
[1.5 km/0.9 mi.]
plus 10/100BASE-TX (RJ-45)
[100m]
S6120-1017
1550nm single mode (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
to (4) RJ-48
[1.5 km/0.9 mi.]
plus 10/100BASE-TX (RJ-45)
[100m]
S6120-1035
1550nm single mode (SC)
[120 km/74.6 mi.] Link Budget: 36.0 dB
to (4) RJ-48
[1.5 km/0.9 mi.]
plus 10/100BASE-TX (RJ-45)
[100m]
S6120-1040
1 SFP port (Empty)
to (4) RJ-48
[1.5 km/0.9 mi.]
plus 10/100BASE-TX (RJ-45)
[100m]
S6121-1040
2 SFP ports (Empty)
to (4) RJ-48
[1.5 km/0.9 mi.]
plus 10/100BASE-TX (RJ-45)
[100m]
Single Fiber Products
Recommended use in pairs
S6120-1029-A1
1310nm TX/1550nm RX single fiber SM
(SC)
[20 km/12.4 mi.] LB: 19.0 dB
to (4) RJ-48
[1.5 km/0.9 mi.]
plus 10/100BASE-TX (RJ-45)
[100m]
S6120-1029-A2
1550nm TX/1310nm RX single fiber SM
(SC)
[20 km/12.4 mi.] LB: 19.0 dB
to
(4) RJ-48
[1.5 km/0.9 mi.]
plus 10/100BASE-TX (RJ-45)
[100m]
S6120-1029-B1
1310nm TX/1550nm RX single fiber SM
(SC)
[40 km/24.9 mi.] LB: 25.0 dB
to
(4) RJ-48
[1.5 km/0.9 mi.]
plus 10/100BASE-TX (RJ-45)
[100m]
S6120-1029-B2
1550nm TX/1310nm RX single fiber SM
(SC)
[40 km/24.9 mi.] LB: 25.0 dB
to
(4) RJ-48
[1.5 km/0.9 mi.]
plus 10/100BASE-TX (RJ-45)
[100m]
Optional Accessories (sold separately)
SFP Modules
Wide Input (24 - 60VDC) Power Supplies
SPS-2460-SA
Stand-Alone Power Supply
Mounting Brackets
WMBL
Wall Mount Bracket 4.0” [102 mm]
Hardware and Performance Specifications
Standards
ANSI T1.102, T1.403 and T1.408
ITU I.431, G.703,G.736, G.775 and G.823
ETSI 300-166, 300-233 and TBR 12/13
AT&T Pub 62411
IEEE 802.3™-2008
Switches
Numerous switch settings for line coding, line build
out, loopback and AIS
Data Rate
Copper ports (RJ-48): T1(J1) = 1.544Mb/s,
E1 = 2.048Mb/s
Ethernet port (RJ-45): 10/100Mbps
SFP port(s) (empty): 100BASE-X/OC-3
Status LEDs
Power, Port Status, Loopback and AIS
Dimensions
Width: 3.7” [94 mm]
Depth: 6.5” [165 mm]
Height: 1.8” [46 mm]
Power Consumption
6W max for dual fiber model,
5.5W max for single fiber model
Input Power
AC: 12 VDC via barrel connector using 100-240VAC,
UL listed power supply
Environment
-10°C to +65°C operating temperature
5%– 95% humidity non-condensing
-40°C to +85°C storage temperature
Safety Compliance
EN55022 Class A, EN55024, CE mark
Shipping Weight
2 lbs. (0.45 kg)
Warranty Lifetime
The ION 4xT1/E1/J1 copper to fiber network in-
terface device (NID) provides a solution for those
users that need to extend multiple T1/E1 connec-
tions and 10/100Mbps Ethernet over fiber.
The ION 4xT1/E1/J1 supports Small Form Plug-
gable (SFP) transceivers to support a variety of
fiber types, distances and wavelengths to provide
maximum flexibility across a variety of network
topologies.
The use of Coarse Wave Division Multiplexing
(CWDM) SFPs can be utilized to further increase
the bandwidth capacity of the fiber infrastructure.
The ION 4xT1/E1/J1 NID must be used in pairs.
A typical installation will include a chassis card
installed in the ION Platform locally and a stand-
alone device installed at the remote location.
terface device (NID) provides a solution for those
users that need to extend multiple T1/E1 connec-
tions and 10/100Mbps Ethernet over fiber.
The ION 4xT1/E1/J1 supports Small Form Plug-
gable (SFP) transceivers to support a variety of
fiber types, distances and wavelengths to provide
maximum flexibility across a variety of network
topologies.
The use of Coarse Wave Division Multiplexing
(CWDM) SFPs can be utilized to further increase
the bandwidth capacity of the fiber infrastructure.
The ION 4xT1/E1/J1 NID must be used in pairs.
A typical installation will include a chassis card
installed in the ION Platform locally and a stand-
alone device installed at the remote location.
S6120 Series
S6120 Series
stand-alone NID
4xT1/E1/J1 + 10/100 Ethernet
Features
4
4 x RJ-48 copper interfaces
1 fiber interface (fixed or SFP)
2 SFP ports on S6121-1040 model
1 RJ-45 10/100Mbps Ethernet port
2 SFP ports on S6121-1040 model
1 RJ-45 10/100Mbps Ethernet port
4
AutoCross (auto MDI/MDI-X on Ethernet port)
4
Pause (Flow Control) on Ethernet port)
4
Loopback via test set
4
Local and remote loopbacks
4
LEDs for device status and troubleshooting
4
Settings for line code, line build out,
loopbacks and Alarm Indication Signal (AIS)
4
Access to complete status and configuration
on local and remote device
4
Remote firmware upgrade
4
Remote management
4
Extended operating temperature
PBX
PBX
PBX
PBX
PBX
PBX
Router
Router
ION Stand-Alone
ION Chassis
Ethernet Switch
Ethernet Switch
Applications
4
T1/E1/J1 extension over fiber
4
Mobile backhaul
4
Business customers
see also:
ION Slide-in-Card 4xT1/E1/J1 + 10/100 Ethernet