Estap ServerMAX SRV26U60_03M1P_TR Manuel D’Utilisation

20

free standing

TECHNICAL SPECIFICATIONS

Main profile (framework) has an aesthetic structure which

increases mechanical resistance, folded at an angle of 90

degrees and consisting of 4 bends for each profile. In total;

16 folds provide framework stability. Additionally, 2 piece

vertical side panel divider profile provides additional

resistance each with a 4 fold design; total of 8 fold additional

support. In total ServerMax main profile framework consists

of a 24 fold engineering design. Manufactured and tested to

provide axial (x, y, z) resistance that meets EN 61587-1 / 5.2.1

and 5.2.2, and external impact resistance that meets

EN 61587-1 / 5.3.3.

Bottom and upper cases have a structure to increase

the resistance and strength of the cabinet by monoblock

bended, welded and profile-interlocking design. Profiles are

manufactured to interlock bottom and upper cases with

screws. The bottom case providing cable access is fitted with

a sliding blanking access plate to prevent dust.

A rubber edge on the cable access plate and sliding structure,

it is possible to fix the cables and allows cables to be placed

into the cabinet without any damage.

Additional there are pre-punched knock outs for air

distribution delivered from raised floor.

Rear door in standard configuration is a double opening

door which is removable and lockable. Integral locking is a 3

point locking system.

Rear doors can be opened up to 215 degrees, are removable

and lockable with handle type locking unit.

Side panels have a structure that can be opened and

removed with slam latch and key. They are lockable and

removable. Side panels consist of a divider profile which

creates 2 pieces side panels on each side. Original functional

side panel is lockable and removable as mentioned above;

the smaller side panel is fixed from inner side with screws.

If additional ventilation is needed this panel can be replaced

with a slotted / perforated one.

Within this engineering construction, the original functional

side panel becomes easy to carry while the divider profile

provides better resistancy.

Front doors are single opening, monoblock, welded, curved,

%63 perforated in standard. Integral locking as 3 point locking

system. For options please see the related diagrams and

technical charts in pages 11-15.

Front door can be opened up to 215 degrees, removable and

lockable with handle type locking unit.

Vented top panel housing with a dedicated space for

ventilation, the fan module system allows easy installation of

max. 6 fans from top.

19”(inch) mounting angles (2ea. in front and 2ea. in rear) are

part of cabinet interior configuration and adjustable in depth.

Baying is possible for side by side applications without

side panels. Levelling feet and integrated castor group are

standard in shipping configuration.

The cabinet meets EN 61587-1, IEC 60917, IEC 60297

standards, RoHS compliancy, Gost and TSE certified.

Cabinets are manufactured in our factory which has

ISO 9001: 2008 Quality Assurance System and our

responsibility for enviroment with ISO 14001:2004

Environmental Management System.

Environment  

EN61587-1/4.2, IEC60068-2-1, IEC60068-2-2, IEC60068-2-30,
IEC60917 and IEC60297
Industrial environment 
EN61587-1/4.3, IEC60068-2-42, IEC60068-2-43 and
IEC60068-2-49,IEC60068-2-1, IEC60917 and IEC60297
Statical mechanical structure load test 
EN61587-1 / 5.2.1, IEC60917 and IEC60297
Statical mechanical structure stability 
EN61587-1 / 5.2.2, IEC60917 and IEC60297
Dynamic load, vibration and mechanical stroke 
EN61587-1 / 5.3.1, EN61587-1 / 5.3.3, IEC60917, IEC60297,
IEC62208
Grounding continuity 
EN61587-1 / 6.2, IEC60917 and IEC60297
Fire and flame resistance 
EN61587-1 / 6.3, IEC60917 and IEC60297
Corrosion 
ISO9227 and ASTM B 117-85, IEC60917 and IEC60297
IP protection degree
IP20 accordingly EN61587-1 / 6.4, IEC60529, IEC60917 and
IEC60297
Transportation
ETS300019-1-2 Class 2.3
Storage
ETS300019-1-1 Class 1.2
Security
EN60950_LVD

Sheet steel 
DIN EN 10130 – 99 Ereğli DC- 01 6112, 7122, RoHS
Electrostatic powder coating 
ISO 9001, ISO 2178, ISO 2813, ISO 6272, ISO 8130-5,
ISO 8130-3, RoHS
Fan
ISO 9001, CE (89/336/EEC EMC, 73/23/EEC LVD), RoHS
Glass
ISO 9001, EN 12150 – 1: 2000 tempered and secure
Fixings
DIN 7985, DIN 965, DIN 7981, DIN 934, DIN 985, DIN 933,
RoHS
Castors
TS EN 12530, TS EN 12532, RoHS
Lock
DIN 1743, DIN 53571, RoHS