Dataram 4GB(2 x 2GB) DDR2-800 GRL800R1/4GB Fascicule
Codes de produits
GRL800R1/4GB
GRL800R
DDR2-800, PC2-6400, Registered, ECC, 1.8V, 240-pin DIMMs
GRL800R
09-Jul-09
Products in Family
GRL800R2/4GB (2 x 2GB 2Rx8 DIMMs)
GRL800R1/4GB (2 x 2GB 1Rx4 DIMMs)
GRL800R/8GB (2 x 4GB 2Rx4 DIMMs)
GRL800R1/4GB (2 x 2GB 1Rx4 DIMMs)
GRL800R/8GB (2 x 4GB 2Rx4 DIMMs)
Features Description
240-pin JEDEC-compliant DIMMs
133.35 mm wide by 30 mm high (1.20” x 5.25”)
Data Transfer Rate: 6.4 Gigabytes/sec
Operating Voltage: 1.8 V ±0.1
Error Checking and Correction (ECC) bits
Supports Intel SDDC and Chipkill Advanced ECC Features
Fully RoHS Compliant
133.35 mm wide by 30 mm high (1.20” x 5.25”)
Data Transfer Rate: 6.4 Gigabytes/sec
Operating Voltage: 1.8 V ±0.1
Error Checking and Correction (ECC) bits
Supports Intel SDDC and Chipkill Advanced ECC Features
Fully RoHS Compliant
Each GRL800R upgrade consists of a matched set of two
DDR2-800 Registered DIMMs with address/command
parity functionality. One 2K-bit EEPROM is used for
Serial Presence Detect.
DDR2-800 Registered DIMMs with address/command
parity functionality. One 2K-bit EEPROM is used for
Serial Presence Detect.
Dataram Product
Dell Product
Supported in these Dell systems:
GRL800R2/4GB
GRL800R1/4GB
GRL800R/8GB
GRL800R1/4GB
GRL800R/8GB
A2407997, A2407999,
A2408001, A2408003,
A2408004, A2408006,
A2408011, A2408013
Not Offered by Dell
A2407998, A2408000,
A2408002, A2408005,
A2408007, A2408010,
A2408012, A2408014
A2408001, A2408003,
A2408004, A2408006,
A2408011, A2408013
Not Offered by Dell
A2407998, A2408000,
A2408002, A2408005,
A2408007, A2408010,
A2408012, A2408014
PowerEdge 2970, SC1435, T605, M605, M805, M905,
R805, R905
R805, R905
30.000
[1.181]
[1.181]
63.00
[2.480]
55.00
[2.165]
5.00
[0.197]
5.18
[0.204]
123.00
[4.842]
[4.842]
10.00
[0.394]
17.80
[0.701]
4.00
[0.157]
2.54 Min
[0.100 Min]
1.27 ±.10
[0.0500 ±0.0040]
3.94 Max
[0.155] Max
4.00 Min
[0.157] Min
133.350
[5.250]
Back view
Front view
Side view
Notes
Tolerances on all dimensions
except where otherwise
indicated are
except where otherwise
indicated are
±.13 (.005).
All dimensions are expressed
in millimeters [inches]
in millimeters [inches]
Copyright
© 2009 Dataram Corporation | U.S.A. Headquarters +1 609-799-0071 | Offices in Europe and Asia | www.dataram.com
The information contained in this document has been carefully checked and is believed to be reliable and accurate. However, Dataram assumes no responsibility for errors.