Fujitsu S26361-F1373-L436 Manuel D’Utilisation
System configurator and order-information guide
PRIMERGY RX300 S7 Status 2014-03-31
Configuration diagram PRIMERGY RX300 S7
System unit ( I )
with up to 6x 3.5" Hard disk drives
Motherboard
front side
Memory CPU1
( Channel A + B + C )
Bay for LocalView LCD
Bank 1 (4 Modules)
Xeon DP
LSD
Bank 2 (4 Modules)
2 USB
Bank 3 (4 Modules)
Air channel
VGA, LAN
Memory CPU2
Frontpanel
( Channel D + E + F)
Bay for 5,25"x 0,5" SATA-BR
Bank 1 (4 Modules)
Xeon DP
or DVD-ROM/RW
Bank 2 (4 Modules)
Bank 3 (4 Modules)
Memory (III )
Bank 3 (4 Modules)
Memory (III )
Processor ( II )
Accessible drives ( V )
rear side
Fan 1 - Fan 5
1. PSU
2. PSU
Needs space for 2
Redundant Fans
hard disk drives!
are standard!
Redundant power
3.5"x1,6"
supply option
Backup drive option
Modular RAID
Raid Card for IME, Raid 0 / 1E
Support
Raid Card for Raid 5
Low-profile extension slots for:
SCSI Controller for backup( VII )
SCSI Controller for backup( VII )
Hard disk drives ( VI )
SAS Disk Array ( VIII )
3.5" SAS/SATA
Communication/Network ( IX )
Miscellaneous ( X )
Miscellaneous ( X )
3.5"x1" SAS or SATA
Slot 6 PCIe-3 x16, 390mm @ CPU2
3.5"x1" SAS or SATA
Slot 5 PCIe-3 x16, 390mm @ CPU2
Slot 4 PCIe-3 x8, max. 390mm @ CPU1
3.5"x1" SAS or SATA
Possibility to install PCIe x16 cards
Slot 3 PCIe-3 x8, max. 390mm @ CPU1
3.5"x1" SAS or SATA
Slot 2 PCIe-3 x8, max. 312mm @ CPU1
3.5"x1" SAS or SATA
Slot 1 PCIe-3 x8, max. 168mm @ CPU1 white colored
Dedicated for modular on-board LAN-Controller
Slot 7 PCIe-3 x8, max. 168mm @ CPU1
3.5"x1" SAS or SATA
Internal slot for modular RAID-Controller
Key:
Included in basic unit
Option
One CPU, one memory per CPU and one PSU has to be selected for an orderable basic unit.
Fujitsu PRIMERGY Server
3 of 31