Avaya 100BASE-FX, LC, SFP AA1419074-E6 Manuel D’Utilisation

You must configure the T1 SFP module to match the parameters of the T1 equipment at the

far end. If you must change the parameters, contact Avaya Technical Support.

The 1000BASE-T SFP provides gigabit Ethernet connectivity using a single eight-pin RJ-45
connector. The 1000BASE-T SFP only operates at 1 gigabit per second (1 Gb/s) and does not
support 100BASE-T or 10BASE-T interfaces. The part number for this model is AA1419043-
E6.

Avaya recommends setting all 1000BaseT ports to auto-negotiate in accordance with the

IEEE 802.3ab standard. By default, SFPs inserted into certain product-specific modules are

set for autonegotiation = True.

The maximum current requirement of the SFP is 375 milliamperes (mA) at 5 volts (V).

The following table describes the 1000BASE-T SFP specifications.

Standards

IEEE 802.3z, IEEE 802.3ab

Connectors

RJ-45

Cabling

CAT5E or better UTP

Distance

Up to 100 m

The 1000BASE-SX SFP provides 1000BASE-SX gigabit Ethernet connectivity at 850 nm using
multimode optical fiber. This SFP supports full-duplex operation only. The part number for this
model is AA1419013-E5.

The following table describes standards, connectors, cabling, and distance for the 1000BASE-
SX SFP.

1000BASE-T SFP specifications

Installation — SFPs and XFPs

December 2010     33